Hi Kotresh The above-mentioned work around did not work properly. On Fri, May 31, 2019 at 3:16 PM deepu srinivasan <[email protected]> wrote:
> Hi Kotresh > We have tried the above-mentioned rsync option and we are planning to have > the version upgrade to 6.0. > > On Fri, May 31, 2019 at 11:04 AM Kotresh Hiremath Ravishankar < > [email protected]> wrote: > >> Hi, >> >> This looks like the hang because stderr buffer filled up with errors >> messages and no one reading it. >> I think this issue is fixed in latest releases. As a workaround, you can >> do following and check if it works. >> >> Prerequisite: >> rsync version should be > 3.1.0 >> >> Workaround: >> gluster volume geo-replication <MASTERVOL> <SLAVEHOST>::<SLAVEVOL> config >> rsync-options "--ignore-missing-args" >> >> Thanks, >> Kotresh HR >> >> >> >> >> On Thu, May 30, 2019 at 5:39 PM deepu srinivasan <[email protected]> >> wrote: >> >>> Hi >>> We were evaluating Gluster geo Replication between two DCs one is in US >>> west and one is in US east. We took multiple trials for different file >>> size. >>> The Geo Replication tends to stop replicating but while checking the >>> status it appears to be in Active state. But the slave volume did not >>> increase in size. >>> So we have restarted the geo-replication session and checked the status. >>> The status was in an active state and it was in History Crawl for a long >>> time. We have enabled the DEBUG mode in logging and checked for any error. >>> There was around 2000 file appeared for syncing candidate. The Rsync >>> process starts but the rsync did not happen in the slave volume. Every time >>> the rsync process appears in the "ps auxxx" list but the replication did >>> not happen in the slave end. What would be the cause of this problem? Is >>> there anyway to debug it? >>> >>> We have also checked the strace of the rync program. >>> it displays something like this >>> >>> "write(2, "rsync: link_stat \"/tmp/gsyncd-au"..., 128" >>> >>> >>> We are using the below specs >>> >>> Gluster version - 4.1.7 >>> Sync mode - rsync >>> Volume - 1x3 in each end (master and slave) >>> Intranet Bandwidth - 10 Gig >>> >> >> >> -- >> Thanks and Regards, >> Kotresh H R >> >
_______________________________________________ Gluster-users mailing list [email protected] https://lists.gluster.org/mailman/listinfo/gluster-users
