Ok I see I won't go down that path of disabling quota. I could now remove the arbiter brick of my volume which has the quota issue so it is now a simple 2 nodes replica with 1 brick per node.
Now I would like to add the brick back but I get the following error: volume add-brick: failed: Host arbiternode.domain.tld is not in 'Peer in Cluster' state In fact I checked and the arbiter node is still rejected as you can see here: State: Peer Rejected (Connected) On the arbiter node glusted.log file I see the following errors: [2020-10-26 18:35:05.605124] E [MSGID: 106012] [glusterd-utils.c:3682:glusterd_compare_friend_volume] 0-management: Cksums of quota configuration of volume woelkli-private differ. local cksum = 0, remote cksum = 66908910 on peer node1.domain.tld [2020-10-26 18:35:05.617009] E [MSGID: 106012] [glusterd-utils.c:3682:glusterd_compare_friend_volume] 0-management: Cksums of quota configuration of volume myvol-private differ. local cksum = 0, remote cksum = 66908910 on peer node2.domain.tld So although I have removed the arbiter brick from my volume it it still complains about that checksum of the quota configuration. I also tried to restart glusterd on my arbiter node but it does not help. The peer is still rejected. What should I do at this stage? ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ On Monday, October 26, 2020 6:06 PM, Strahil Nikolov <hunter86...@yahoo.com> wrote: > Detaching the arbiter is pointless... > Quota is an extended file attribute, and thus disabling and reenabling quota > on a volume with millions of files will take a lot of time and lots of IOPS. > I would leave it as a last resort. > > Also, it was mentioned in the list about the following script that might help > you: > https://github.com/gluster/glusterfs/blob/devel/extras/quota/quota_fsck.py > > You can take a look in the mailing list for usage and more details. > > Best Regards, > Strahil Nikolov > > В понеделник, 26 октомври 2020 г., 16:40:06 Гринуич+2, Diego Zuccato > diego.zucc...@unibo.it написа: > > Il 26/10/20 15:09, mabi ha scritto: > > > Right, seen liked that this sounds reasonable. Do you actually remember the > > exact command you ran in order to remove the brick? I was thinking this > > should be it: > > gluster volume remove-brick <VOLNAME> <BRICK> force > > but should I use "force" or "start"? > > Memory does not serve me well (there are 28 disks, not 26!), but bash > history does :) > > gluster volume remove-brick BigVol replica 2 > > ============================================= > > str957-biostq:/srv/arbiters/{00..27}/BigVol force > > gluster peer detach str957-biostq > > ================================== > > gluster peer probe str957-biostq > > ================================= > > gluster volume add-brick BigVol replica 3 arbiter 1 > > ==================================================== > > str957-biostq:/srv/arbiters/{00..27}/BigVol > > You obviously have to wait for remove-brick to complete before detaching > arbiter. > > > > IIRC it took about 3 days, but the arbiters are on a VM (8CPU, 8GB RAM) > > > that uses an iSCSI disk. More than 80% continuous load on both CPUs and > > > RAM. > > > That's quite long I must say and I am in the same case as you, my arbiter > > > is a VM. > > Give all the CPU and RAM you can. Less than 8GB RAM is asking for > troubles (in my case). > > ----------------------------------------------------------------------------------------- > > Diego Zuccato > DIFA - Dip. di Fisica e Astronomia > Servizi Informatici > Alma Mater Studiorum - Università di Bologna > V.le Berti-Pichat 6/2 - 40127 Bologna - Italy > tel.: +39 051 20 95786 > > Community Meeting Calendar: > > Schedule - > Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC > Bridge: https://bluejeans.com/441850968 > > Gluster-users mailing list > Gluster-users@gluster.org > https://lists.gluster.org/mailman/listinfo/gluster-users ________ Community Meeting Calendar: Schedule - Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC Bridge: https://bluejeans.com/441850968 Gluster-users mailing list Gluster-users@gluster.org https://lists.gluster.org/mailman/listinfo/gluster-users
