As the arbiter doesn't receive or provide any data to the clients - just metadata ,so bandwith is not critical but lattency is.Ensure that lattency is the same or lower for the arbiter node and you can use an SSD/NVME to ensure that storage lattency won't be a bottleneck. Also, don't forget to specify the isize=512 and bump the 'maxpct' to a bigger number. Usually I set it to minimum 80%. Best Regards,Strahil Nikolov On Fri, Dec 2, 2022 at 18:59, Filipe Alvarez<filipealva...@gmail.com> wrote: Hi glusters, I'm close to deploy my first GlusterFS replica 3 arbiter 1 volume. Below I will describe my hardware / plans:
Node1: two bricks, 2 x raid0 arrays 40gbe network Node2: two bricks, 2 x raid0 arrays 40gbe network Node3: Arbiter 1gbe network Between Node1 and Node2, I have a 40gbe network. But the arbiter has 1 gbe network. The question is, can arbiter run in a slow network ? It will affect the general performance of volume? Thank you ________ Community Meeting Calendar: Schedule - Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC Bridge: https://meet.google.com/cpu-eiue-hvk Gluster-users mailing list Gluster-users@gluster.org https://lists.gluster.org/mailman/listinfo/gluster-users
________ Community Meeting Calendar: Schedule - Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC Bridge: https://meet.google.com/cpu-eiue-hvk Gluster-users mailing list Gluster-users@gluster.org https://lists.gluster.org/mailman/listinfo/gluster-users
