Hi all, I have successfully imported an IGES-file to Gmsh 2.2 (Windows XP). Meshing works fine with different characteristic length factors set in Options-Mesh-General. Now I would like to refine the mesh on some certain points. How can I do this? The IGES-file is listed here: _http://www.femcfd.com/assets/files/model1_igs.txt_ (http://www.femcfd.com/assets/files/model1_igs.txt) (or click on link in _http://www.femcfd.com/gmsh-2-2-iges-datei-listing.html_ (http://www.femcfd.com/gmsh-2-2-iges-datei-listing.html) ) A picture of the geometry can be seen here: _http://www.femcfd.com/gmsh-2-2-iges-datei-laden.html_ (http://www.femcfd.com/gmsh-2-2-iges-datei-laden.html) And a picture of the mesh is presented here: _http://www.femcfd.com/gmsh-2-2-iges-modell-vernetzt.html_ (http://www.femcfd.com/gmsh-2-2-iges-modell-vernetzt.html) Greetings,
Michael Glockenmeier ---------------------------------------------- Fa. Michael Glockenmeier Dipl.-Ing. Michael Glockenmeier Hauptstr. 55 c D-86926 Greifenberg Germany Tel ++49 (0) 8192/933 185 Fax ++49 (0) 8192/933 186 Email [EMAIL PROTECTED] (mailto:[EMAIL PROTECTED]) ---------------------------------------------
_______________________________________________ gmsh mailing list [email protected] http://www.geuz.org/mailman/listinfo/gmsh
