Billy Araújo wrote: > > I forgot to say that this happens using the windows version. I tried on > the Linux version and it seems to be working OK.
Hi Billy - Even on Linux the parametrization of the surface looks weird, and the resulting mesh is extremely distorted. If possible always try to use STEP files instead of IGES (IGES files do not contain the topology, so a geometrical tolerance must be used to decide when entities are identical). > > Regards, > > Billy. > > > -----Original Message----- > From: [EMAIL PROTECTED] on behalf of Billy Araújo > Sent: Thu 7/17/2008 12:35 AM > To: [email protected] > Subject: [Gmsh] Bug in gmsh-2.2.3 / OCC? > > > Hi, > > > I send an IGES file in attachment. > > It gives an error in the edge loop when importing. > > Error : Something wrong in edge loop > Warning : OCC STL triangulation failed > > And when I try to mesh it, Gmsh crashes. > > > Billy. > > > ------------------------------------------------------------------------ > > _______________________________________________ > gmsh mailing list > [email protected] > http://www.geuz.org/mailman/listinfo/gmsh -- Prof. Christophe Geuzaine University of Liege, Electrical Engineering and Computer Science http://www.montefiore.ulg.ac.be/~geuzaine _______________________________________________ gmsh mailing list [email protected] http://www.geuz.org/mailman/listinfo/gmsh
