Christophe Geuzaine wrote:
Hi Moritz - You take the minimum of all fields with Field[5]. So you
will never see the 0.1 max char length from Field[4] (since you impose a
smaller one, 0.005, outside Field[2].DistMax).
Just change
Field[2].LcMax = 0.005;
into
Field[2].LcMax = 0.1;
Thanks for your answer.
I tried the modification you told me already for myself (of course I tried it
again after your email) but it does not give the the result I want. I produces a
mesh density that looks like this:
Mesh density
^
| ----------------|
| |
| |
| |
| --------------
| \
| \
| \
| -------------
|
| ^ DistMin 1
| ^ DistMax 1
| ^ DistMin 2
| ^ DistMax 2
_________________________________________________> Distance from attractor
But what I want is this:
Mesh density
^
| ----------------
| \
| \
| \
| -----------
| \
| \
| \
| -------------
|
| ^ DistMin 1
| ^ DistMax 1
| ^ DistMin 2
| ^ DistMax 2
_________________________________________________> Distance from attractor
Description of drawings:
DistMin 1 and DistMax 1 corresponds to Field[2].DistMin and Field[2].DistMax
and DistMin 2 and DistMax 2 correponds to Field[4].DistMin and Field[2].DistMax
in my example file attached to this email.
After changing
Field[2].LcMax = 0.005;
to
Field[2].LcMax = 0.1;
the
Field[2].DistMax = 0.2;
command is ignored. Instead of a slow mesh density gradient from DistMin of
Field 2 to DistMax of Field 2 the mesh density almost instantly changes from
LcMin of Field 2 to LcMin of Field 4 at DistMin of Field 2.
I only used the MinField because I want both threshold fields to be used. If I
use one of the threshold fields as a backround field the other one will be
totally ignored. I do not want that some mimimum values of something are taken.
All the values the 2 threshold fields should be taken as I stated them.
Does anybody know how I could produce my desired mesh?
//begin "my example"
lowPr = 0.1;
Point(1) = {0,0,0,lowPr};
Point(2) = {1,0,0,lowPr};
Point(3) = {1,1,0,lowPr};
Point(4) = {0,1,0,lowPr};
Point(5) = {0.5,0.5,0,0};
// points to see where the DistMax and DistMin are
Point(6) = {0.05+0.5,0.5,0,lowPr};
Point(7) = {0.2+0.5,0.5,0,lowPr};
Point(8) = {0.3+0.5,0.5,0,lowPr};
Point(9) = {0.5+0.5,0.5,0,lowPr};
Line(1) = {1,2};
Line(2) = {2,3};
Line(3) = {3,4};
Line(4) = {4,1};
Line Loop(5) = {1,2,3,4};
Plane Surface(6) = {5};
Field[1] = Attractor;
Field[1].NodesList = {5};
Field[2] = Threshold;
Field[2].IField = 1;
Field[2].LcMin = 0.001;
Field[2].LcMax = 0.005;
//Field[2].LcMax = 0.1;
Field[2].DistMin = 0.05;
Field[2].DistMax = 0.2;
Field[3] = Attractor;
Field[3].NodesList = {5};
Field[4] = Threshold;
Field[4].IField = 3;
Field[4].LcMin = 0.005;
Field[4].LcMax = 0.1;
Field[4].DistMin = 0.3;
Field[4].DistMax = 0.5;
Field[5] = Min;
Field[5].FieldsList = {2,4};
Background Field = 5;
_______________________________________________
gmsh mailing list
[email protected]
http://www.geuz.org/mailman/listinfo/gmsh
