Hi Dave, Windows. I will be trying on Linux this evening on version 2.1.1.
> And do you realize that with the default values for the characteristic > lengths, the 2D mesh is not very nice (big triangles next to much > smaller ones), so the 3D mesher will have a hard time to try to mesh > your volume ? I have made CL small (0.1) but the problem persists. Thanks for the report, good to know this seems to be operating system dependant. Roland > > Cheers, > > Dave > > -- > David Colignon, Ph.D. > Collaborateur Logistique du F.R.S.-FNRS > CÉCI - Consortium des Équipements de Calcul Intensif > ACE - Applied & Computational Electromagnetics > Sart-Tilman B28 > Université de Liège > 4000 Liège - BELGIQUE > Tél: +32 (0)4 366 37 32 > Fax: +32 (0)4 366 29 10 > WWW: http://hpc.montefiore.ulg.ac.be/ > Agenda: http://www.google.com/calendar/embed?src=david.colignon%40gmail.com > > > > Roland Tollenaar wrote: >> Hi, >> >> I understand from the site that this list also takes the bug reports. >> >> The application crashes when 3D meshing a step file with second order >> elements. NB!!! I am not talking about 2D meshing. I am talking about >> 3D meshing but using the second order element feature (C3D10 instead >> of C3D4) >> >> No optimization (previously we discovereed that the crashing occurred >> only when the netgen optimizer was used, in this case NO optimizing is >> used) but the application still crashes. >> >> Attached is the model which invokes this naughty behaviour. >> >> Kind regards, >> >> Roland. >> >> >> ------------------------------------------------------------------------ >> >> _______________________________________________ >> gmsh mailing list >> [email protected] >> http://www.geuz.org/mailman/listinfo/gmsh _______________________________________________ gmsh mailing list [email protected] http://www.geuz.org/mailman/listinfo/gmsh
