Tom De Vuyst wrote: > Hi Christophe, > > I have a question regarding the use of the Duplicata option when copying > geometry. Is it possible to retain the mesh specifictations (Transfinite > Line, Recombine, ...) applied to the initial geometry? Attached you will > find an example which illustrates this.
Hi Tom - Unfortunately not, because this would break e.g. extrusion. One thing we were thinking about was to add an option to the Duplicata command to actually copy the mesh (would be very useful for periodic grids). The details are a bit tricky though, so I don't know when we'll have time to implement it. > > Regards, > > Tom > > > ------------------------------------------------------------------------ > > _______________________________________________ > gmsh mailing list > [email protected] > http://www.geuz.org/mailman/listinfo/gmsh -- Prof. Christophe Geuzaine University of Liege, Electrical Engineering and Computer Science http://www.montefiore.ulg.ac.be/~geuzaine _______________________________________________ gmsh mailing list [email protected] http://www.geuz.org/mailman/listinfo/gmsh
