Hello all, I want to use gmsh for some simple (structured) meshes that I want to load in CFX (to be exact, the preprocessor ANSYS CFX5pre). I have used one of the example files in the demos/ folder (hex.geo) and used it to create a simple cube with some cells. I found out that the type 'I-deas universal mesh' (.unv) can be read by CFX successfully. However, CFX does not recognize the different surfaces anymore (as present in gmsh) and therefore I am not able to apply boundary conditions in the CFX model. Does anyone know how to include such information in the .unv file so that CFX recognizes the boundaries? Or are there other formats which support this?
Thanks, Benjamin ************************************************************************ Dit bericht kan informatie bevatten die niet voor u is bestemd. Indien u niet de geadresseerde bent of dit bericht abusievelijk aan u is toegezonden, verzoeken wij u dit onmiddellijk aan de afzender te melden en de inhoud van het bericht te vernietigen. Aan dit bericht kunnen geen rechten worden ontleend en ECN aanvaardt geen aansprakelijkheid voor schade, van welke aard ook, die verband houdt met risico's verbonden aan het elektronisch verzenden van berichten. This message may contain information that is not intended for you. If you are not the addressee or if this message was sent to you by mistake, you are requested to immediately inform the sender and delete the message. This e-mail is not intended to create a legally binding commitment and ECN accepts no liability for damage of any kind resulting from the risks inherent to the electronic transmission of messages. ECN, P.O. Box 1, 1755 ZG Petten, The Netherlands Dutch CoC number: 41151233 ************************************************************************ _______________________________________________ gmsh mailing list [email protected] http://www.geuz.org/mailman/listinfo/gmsh
