Sehr geehrte Damen und Herren,
Ich befinde mich im Urlaub vom 23.2.2009 - 13.3.2009. Bei dringenden Fragen wenden Sie sich bitte an: Andreas Brendle Telefon: 07542/9468-16 eMail: [email protected] Freundliche Gre - Kind Regards Samuel Vogel, Dipl.-Physiker Teamleiter Analytik makon engineering GmbH Karlstrae 16 88069 Tettnang, Bodensee Germany Tel.: 07542/9468-37 Email: [email protected] Internet: www.makon-engineering.de > Fr smtliche Lieferungen und Leistungen gelten unsere Allgemeinen > Geschftsbedingungen < makon engineering GmbH; Geschftsfhrender Gesellschafter: Bernd Danckert, Dipl.-Ing. Handelsregister Ulm HR B 630833; Sitz und Gerichtsstand der Firma: Tettnang ----------------------------------------------------------------------------------------------------------------------------- Diese E-Mail ist vertraulich. Falls Sie nicht der angegebene Empfnger sind oder falls diese E-Mail irrtmlich an Sie adressiert wurde, informieren Sie uns bitte unverzglich und lschen Sie diese E-Mail in Ihrem Computer. Jede unbefugte Reproduktion, Modifikation, Verbreitung, Verteilung und/oder Publikation dieser E-Mail ist streng verboten. Der Inhalt dieser E-Mail bleibt unverbindlich, solange die Fa. makon engineering GmbH ihn nicht schriftlich besttigt hat. This e-mail is confidential. If you are not the named recipient (s) or if you have received this e-mail in error, please notify us immediately and delete the e-mail in your computer. Any form of unauthorised reproduction, dissemination, disclosure, modification, distribution and/or publication of this e-mail ist strictly prohibited. The contents of this e-mail remain without any obligation unless being verified by a written confirmation of makon engineering GmbH. Send gmsh mailing list submissions to [email protected] To subscribe or unsubscribe via the World Wide Web, visit http://www.geuz.org/mailman/listinfo/gmsh or, via email, send a message with subject or body 'help' to [email protected] You can reach the person managing the list at [email protected] When replying, please edit your Subject line so it is more specific than "Re: Contents of gmsh digest..." Today's Topics: 1. SolidWork to OpenCascade conversion (Pierre JUILLARD) ---------------------------------------------------------------------- Message: 1 Date: Thu, 19 Feb 2009 21:56:01 +0100 From: Pierre JUILLARD <[email protected]> Subject: [Gmsh] SolidWork to OpenCascade conversion To: "Zenker, Dr. Matthias" <[email protected]> Cc: [email protected] Hi Matthias, It may be a little bit late, but I also found out on the same website a converter from Solidwork to OpenCascade. There is a 3 days free trial license. http://www.datakit.com/cad-convertors/solidworks-to-opencascade/186-solidworks-3d-to-opencascade.html If you try it out, would you mind to share your feeling concerning the conversion quality? Cheers, Pierre 2009/1/28 Zenker, Dr. Matthias <[email protected]> > Thank you Pierre, > > I would not be interested in CATIA, but in SolidWorks native import. > > If I understand correctly, there is a SolidWorks interface to gmsh which > can not be distributed just for license reasons. > Is there a legal way to get it? We have SolidWorks in our company, so if > the interface can be bought, we would at least consider it. > > Best regards, > > Matthias > > ------------------------------ > *From:* Pierre JUILLARD [mailto:[email protected]] > *Sent:* Monday, January 26, 2009 9:56 PM > *To:* Christophe Geuzaine > *Cc:* Zenker, Dr. Matthias; [email protected] > *Subject:* Re: [Gmsh] gmsh-announce Digest, Vol 37, Issue 1 > > By the way Mathias, > > If you are interested in Catia files in GMSH, you may be interested in this > conversion tool available on the open cascade website, which allows > converting CATIA files into BREP (open cascade) files that can be opened in > GMSH. > http://www.opencascade.org/support/products/dataex/catia/ (in english) > > http://www.datakit.com/convertisseurs-cao/catia-v5-to-opencascade/93-catia-v5-3d-to-opencascade.html(I > hope you can read french...) > > Regards, > > Pierre > > > > > 2009/1/26 Pierre JUILLARD <[email protected]> > >> Hi Christophe, >> >> Does it mean that it could be possible to rent a library or something that >> GMSH could directly use to read CATPart or CATProduct (from Catia) files? >> >> Thancks in advance for your comments, >> >> Regards, >> >> Pierre >> >> >> >> 2009/1/26 Christophe Geuzaine <[email protected]> >> >> Zenker, Dr. Matthias wrote: >>> > Hi, >>> > >>> > reading section 3 of the paper mentioned below, I have the impression >>> > that gmsh can directly read CAD models (e.g from SolidWorks or CATIA). >>> > Is this possible, or did I misunderstand? >>> >>> Hi Matthias - It is possible, but the only CAD kernel for which we can >>> legally distribute the interface is OpenCascade. When you link with >>> OpenCascade you can then load native OpenCascade files (".brep"). >>> >>> The license for e.g. SolidWorks prevents us from distributing the >>> interface... >>> >>> >>> > The documentation speaks only about STEP, IGES and such. >>> > >>> > Matthias >>> > >>> >> -----Original Message----- >>> >> From: [email protected] >>> >> [mailto:[email protected]] On Behalf Of >>> >> [email protected] >>> >> Sent: Saturday, January 24, 2009 12:00 PM >>> >> To: [email protected] >>> >> Subject: gmsh-announce Digest, Vol 37, Issue 1 >>> >> >>> >> Send gmsh-announce mailing list submissions to >>> >> [email protected] >>> >> >>> >> To subscribe or unsubscribe via the World Wide Web, visit >>> >> http://www.geuz.org/mailman/listinfo/gmsh-announce >>> >> or, via email, send a message with subject or body 'help' to >>> >> [email protected] >>> >> >>> >> You can reach the person managing the list at >>> >> [email protected] >>> >> >>> >> When replying, please edit your Subject line so it is more >>> >> specific than "Re: Contents of gmsh-announce digest..." >>> >> >>> >> >>> >> Today's Topics: >>> >> >>> >> 1. New Gmsh release: 2.3.0 (Christophe Geuzaine) >>> >> >>> >> >>> >> ---------------------------------------------------------------------- >>> >> >>> >> Message: 1 >>> >> Date: Fri, 23 Jan 2009 14:19:06 +0100 >>> >> From: Christophe Geuzaine <[email protected]> >>> >> Subject: [Gmsh-announce] New Gmsh release: 2.3.0 >>> >> To: [email protected] >>> >> Message-ID: <[email protected]> >>> >> Content-Type: text/plain; charset=ISO-8859-1; format=flowed >>> >> >>> >> >>> >> New in 2.3.0: major graphics and GUI code refactoring; new >>> >> full-quad/hexa subdivision algorithm (removed >>> >> Mesh.RecombineAlgo); improved automatic transfinite corner >>> >> selection (now also for volumes); improved visibility >>> >> browser; new automatic adaptive visualization for high-order >>> >> simplices; modified arrow size, clipping planes and transform >>> >> options; many improvements and bug fixes all over the place. >>> >> >>> >> Downloads, mailing lists, etc.: http://geuz.org/gmsh/ >>> >> >>> >> >>> >> PS: The "Gmsh paper" has been accepted for publication (the >>> >> preprint is available here: >>> >> http://geuz.org/gmsh/gmsh_paper_preprint.pdf). For now, you >>> >> can cite it as >>> >> >>> >> ``C. Geuzaine and J.-F. Remacle. Gmsh: a three-dimensional >>> >> finite element mesh generator with built-in pre- and >>> >> post-processing facilities. International Journal for >>> >> Numerical Methods in Engineering, Accepted for publication, 2009'' >>> >> >>> >> We will update the reference on the web site with volume and >>> >> page information as soon as the article is actually published. >>> >> >>> >> >>> >> >>> >> >>> >> ------------------------------ >>> >> >>> >> _______________________________________________ >>> >> gmsh-announce mailing list >>> >> [email protected] >>> >> http://www.geuz.org/mailman/listinfo/gmsh-announce >>> >> >>> >> >>> >> End of gmsh-announce Digest, Vol 37, Issue 1 >>> >> ******************************************** >>> >> >>> > >>> > _____________________________________________________________________ >>> > ERBE Elektromedizin GmbH >>> > Firmensitz: 72072 Tuebingen >>> > Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede >>> > Registergericht: Stuttgart HRB 380137 >>> > >>> > >>> > _______________________________________________ >>> > gmsh mailing list >>> > [email protected] >>> > http://www.geuz.org/mailman/listinfo/gmsh >>> > >>> > >>> >>> >>> -- >>> Prof. Christophe Geuzaine >>> University of Liege, Electrical Engineering and Computer Science >>> http://www.montefiore.ulg.ac.be/~geuzaine<http://www.montefiore.ulg.ac.be/%7Egeuzaine> >>> >>> >>> _______________________________________________ >>> gmsh mailing list >>> [email protected] >>> http://www.geuz.org/mailman/listinfo/gmsh >>> >> >> > > > > > ERBE Elektromedizin GmbH > Firmensitz: 72072 Tuebingen > Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede > Registergericht: Stuttgart HRB 380137 > > > _______________________________________________ > gmsh mailing list > [email protected] > http://www.geuz.org/mailman/listinfo/gmsh > > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://www.geuz.org/pipermail/gmsh/attachments/20090219/938d545b/attachment.html ------------------------------ _______________________________________________ gmsh mailing list [email protected] http://www.geuz.org/mailman/listinfo/gmsh End of gmsh Digest, Vol 73, Issue 21 ************************************
_______________________________________________ gmsh mailing list [email protected] http://www.geuz.org/mailman/listinfo/gmsh
