Hi Christophe, First I want to thank you for gmsh which is a very nice tool. I have found an interesting code that makes a cartesian grid of an .stl model. My interest is to make a high pressure die casting simulation using OpenFVM. The problem about die casting is that 3D models generally are very complicated and can have dirty geometry, so is not so simple carry out a good mesh. I have used MagmaSoft (that is considered the best software in die casting) for 5 years at work, and this software has a very robust cartesian grid mesher, unlike Procast (the second best) that, using an unstructure tetraedral mesh, may have problems in the preprocessing process. So, as I'm not a programmer, I would like to ask you if is possible to implement a cartesian grid in gmsh.
Here the link to stlToGmsh: http://www.cfd-online.com/Forums/openfoam-meshing-opensource/61973-generating-unstructured-grids-stl-files.html Thanks in advance Dario _______________________________________________ gmsh mailing list [email protected] http://www.geuz.org/mailman/listinfo/gmsh
