Le 14-juil.-09 à 10:35, Mengda Wu a écrit :
Thanks for the explanation.
It will be great if you can suggest some walkaround. Maybe define
two splines and make their connection
smooth? Is that possible?
you can define 2 splines, but they will not be smoothly connected
unless you choose control points adequately
jfr
Thanks,
Mengda
On Tue, Jul 14, 2009 at 1:25 AM, Jean-Francois Remacle <[email protected]
> wrote:
Le 14-juil.-09 à 10:19, Mengda Wu a écrit :
Hi all,
I am trying to mesh the extrusion of a closed spline (attached).
Only the mesh of the lateral surface is needed, i.e. without the caps.
But gmsh crashes right away I hit the mesh button. Similar crash
occurs with a closed bspline.
yes, that's normal : gmsh's native cad modeler does not support
(yet ?) periodic surfaces.
JFR
BTW, the meshing is successful if the closed line is composed of a
spline and a line or two splines. Can you help me on this issue?
I tested this using the stable version 2.3.1 on both Windows and
Linux.
Thanks,
Mengda
<extrude_closed.geo>_______________________________________________
gmsh mailing list
[email protected]
http://www.geuz.org/mailman/listinfo/gmsh
----------------
Prof. Jean-Francois Remacle
Universite catholique de Louvain (UCL)
Tel : +32-10-472082 -- Mobile : +32-473-909930
----------------
Prof. Jean-Francois Remacle
Universite catholique de Louvain (UCL)
Tel : +32-10-472082 -- Mobile : +32-473-909930
_______________________________________________
gmsh mailing list
[email protected]
http://www.geuz.org/mailman/listinfo/gmsh
