Hi Praveen,
unfortunately, currently we can only mix different CAD models (eg. Geo + iges) for volume definition. So you can not yet
create a Geo curve that connects a Geo point to an iges point. But this is on our TODO list
Cheers,
Dave
--
David Colignon, Ph.D.
Collaborateur Logistique du F.R.S.-FNRS
CÉCI - Consortium des Équipements de Calcul Intensif
ACE - Applied & Computational Electromagnetics
Sart-Tilman B28
Université de Liège
4000 Liège - BELGIQUE
Tél: +32 (0)4 366 37 32
Fax: +32 (0)4 366 29 10
WWW: http://hpc.montefiore.ulg.ac.be/
Agenda: http://www.google.com/calendar/embed?src=david.colignon%40gmail.com
Praveen C wrote:
Sorry, I should make a correction to my email. I am using an IGS file
not stl.
praveen
On Wed, Jul 22, 2009 at 10:08 PM, Praveen C <[email protected]
<mailto:[email protected]>> wrote:
Hello
I obtained the definition of a wing geometry in the form of an stl
file. I now try to define an outer boundary. First I am trying to
make a line from a new point to a point present in the stl file. But
gmsh gives the error
Error : Unknown control point 15 in Curve 1
But point number 15 exists. Can somebody tell me what I am doing wrong ?
Thanks
praveen
------------------------------------------------------------------------
_______________________________________________
gmsh mailing list
[email protected]
http://www.geuz.org/mailman/listinfo/gmsh
_______________________________________________
gmsh mailing list
[email protected]
http://www.geuz.org/mailman/listinfo/gmsh
