Hi,
--
David Colignon, Ph.D.
Collaborateur Logistique du F.R.S.-FNRS
CÉCI - Consortium des Équipements de Calcul Intensif
ACE - Applied & Computational Electromagnetics
Sart-Tilman B28
Université de Liège
4000 Liège - BELGIQUE
Tél: +32 (0)4 366 37 32
Fax: +32 (0)4 366 29 10
WWW: http://hpc.montefiore.ulg.ac.be/
Agenda: http://www.google.com/calendar/embed?src=david.colignon%40gmail.com
On 10/12/09 07:18, 정상엽 wrote:
Dear, Gmsh developer
I made a voronoi geometry and meshing it using 'gmsh'.
But when meshing the geometry, the error message represent as follows,
------------------------------------------------
Error : Mesh generation error summary
Error : 0 warning
Error : 1 error
Error : Check the full log for details
-------------------------------------------------
Hi,
this is only the summary of the error message printed at the end. You have to search for the real error message in all
the text that was printed before. And you will find something like:
...
...
Info : Meshing volume 553 (Delaunay)
Error : Self intersecting surface mesh, computing intersections (this could
take a while)
Info : 232 faces self-intersect
Info : face (181 14 31) on model face 81
...
...
That means that you have a problem in your geometry.
If you look at your Volumes with Tools -> Visibility , you will see that most
of your volumes are completely wrong !
Regards,
Dave
How can i fix it, does it have problem in geometry??
or it is impossible 3D meshing??
I send you the geometry file.
Thank you.
_______________________________________________
gmsh mailing list
[email protected]
http://www.geuz.org/mailman/listinfo/gmsh
_______________________________________________
gmsh mailing list
[email protected]
http://www.geuz.org/mailman/listinfo/gmsh
