Hi everybody, <<TestCubeWorking.geo>> <<TestCubeNOTWorking.geo>>
I have a problem creating a 3d-Mesh with the Transfinite Volume algorithms. To explain the Problem I made two Cubes. The only difference between the Cubes is that the two points have other numbers. (In CubeNOTWorking Point 7 and 8 are swapped.) Because of this i had to change all the arguments of the line command and in the transfinite surface command i had to change 2 points. As you can see, if you load the TestCubeNOTWorking.geo, you can't create a 3d-mesh because the surfaces are incompatible. But the 2d Surface seems to be correct. I have really no idea why this isn't working I checked it a million times and tried a lot of things. At the moment I want to create a sphere with gmsh. But I got the Problem with transfinite volume algorithms. The numbers of the Volume are written in red. Volume 1 and 6 is working where as 2,3,4,5 isn't working. if the transfinite Volume algorithms isn't working, is it possible to solve it with the extrude command? Thanks Henning
TestCubeWorking.geo
Description: TestCubeWorking.geo
TestCubeNOTWorking.geo
Description: TestCubeNOTWorking.geo
_______________________________________________ gmsh mailing list [email protected] http://www.geuz.org/mailman/listinfo/gmsh
