Hi Donato,
As said on the error message, it means that a ruled surface needs to
be defined by only 4 lines! If your surfaces are planar, use the plane
surface which can take more of them, otherwise you have to design your
lines so as to form curved surfaces by sets of four lines. I guess
that it because you use two lines to drive the first to match the last
and represent the curvature
regards
Julien
On 2 Sep 2010, at 09:21, [email protected] wrote:
When I create two surface of my geometry appears the message:
Wrong definition of Ruled Surface : 2 bonders instead of 3 or 4
Wrong definition of Ruled Surface : 12 bonders instead of 3 or 4
what it means?
Help me
Risparmia con Tutto Incluso Light: telefono + adsl 8 mega a soli
19,95 € al mese per un anno!SCONTO DI 120 EURO! http://abbonati.tiscali.it/telefono-adsl/prodotti/tc/tuttoincluso_light/?WT.mc_id=01fw
_______________________________________________
gmsh mailing list
[email protected]
http://www.geuz.org/mailman/listinfo/gmsh
Julien Hoessler
PhD Student
Department of Aeronautics
Imperial College London
Phone: +44 (0) 20759 45042
Email: [email protected]
_______________________________________________
gmsh mailing list
[email protected]
http://www.geuz.org/mailman/listinfo/gmsh
