Thanks for the prompt reply. I will try this tonight and will let you know if I still have issues.
Vijay On Wed, Oct 6, 2010 at 2:30 PM, Christophe Geuzaine <[email protected]> wrote: > On 06/10/10 01:58, Vijay S. Mahadevan wrote: >> >> Hi, >> >> I have a nice 2-D lattice that I want to discretize using higher order >> quadrangles. Since the GUI version does not seem to support p>2, I >> work with the command line version (ver: 2.4.2). But it does not >> yield correct results. The first and second order meshes work >> correctly and display as they should but the higher order meshes are >> buggy (the internal nodes per element are incomplete and >> inconsistent). I would really appreciate it if you can help me out in >> finding the error in the geo file for using higher order >> discretizations. >> >> I've attached the geometry file with the mail along with the discrete >> mesh for 2nd and 3rd order quads. If you need anything else, do let me >> know. > > Hi Vijay - this should be fixed in ewcent nightly snapshots. Could you give > it a try? > >> >> Thank you, >> Vijay >> >> >> >> _______________________________________________ >> gmsh mailing list >> [email protected] >> http://www.geuz.org/mailman/listinfo/gmsh > > > -- > Prof. Christophe Geuzaine > University of Liege, Electrical Engineering and Computer Science > http://www.montefiore.ulg.ac.be/~geuzaine > _______________________________________________ gmsh mailing list [email protected] http://www.geuz.org/mailman/listinfo/gmsh
