I see. I don't know how to do that in CAD. Matthias ---------------------------------------------------------------- ERBE Elektromedizin GmbH Dr.rer.nat. Matthias Zenker Dipl. Phys. Grundlagenentwicklung / Fundamental Development Waldhoernlestrasse 17 72072 Tuebingen Germany Phone + 49 (0) 7071 755 - 226 Fax + 49 (0) 7071 755 - 5226 E-Mail: <mailto:[email protected]> URL: http://www.ERBE-med.com <http://www.erbe-med.com/> ----------------------------------------------------------------
________________________________ Von: Wai Sam Wong [mailto:[email protected]] Gesendet: Dienstag, 16. November 2010 12:28 An: Zenker, Dr. Matthias Betreff: Re: [Gmsh] Define physical groups in CAD file Yes, I meant physical groups. They could be defined easily in gmsh but when you have a lot of boundaries, the process becomes tedious. So if you could tag them beforehand in CAD, I then could write a script to set the physical groups automatically in gmsh. On 16 November 2010 11:18, Zenker, Dr. Matthias <[email protected]> wrote: Stupid question: why would you want to set boundary conditions in gmsh? Or do you mean physical groups? Those can be defined in gmsh very confortably IMHO. Matthias ---------------------------------------------------------------- ERBE Elektromedizin GmbH Dr.rer.nat. Matthias Zenker Dipl. Phys. Grundlagenentwicklung / Fundamental Development Waldhoernlestrasse 17 72072 Tuebingen Germany Phone + 49 (0) 7071 755 - 226 Fax + 49 (0) 7071 755 - 5226 E-Mail: <mailto:[email protected]> URL: http://www.ERBE-med.com <http://www.erbe-med.com/> ---------------------------------------------------------------- ________________________________ Von: Wai Sam Wong [mailto:[email protected]] Gesendet: Montag, 15. November 2010 15:34 An: [email protected] Betreff: [Gmsh] Define physical groups in CAD file Hi there, Does anyone know how to add boundary conditions information into CAD files, e.g. .stp, .igs or .brep, for example using opencascade or salome? So that this will ease the setting of boundary conditions in gmsh itself after importing the CAD models. Thanks! Sam _______________________________________________ gmsh mailing list [email protected] http://www.geuz.org/mailman/listinfo/gmsh
_______________________________________________ gmsh mailing list [email protected] http://www.geuz.org/mailman/listinfo/gmsh
