Hi everyone, Can you please tell me if it is possible to specify the size of elements in a region based on, for example, the region number and a transition distance? I usually define my element sizes during Point definitions and on occasion using Fields, but I have some geometries for which I would like to set the target element size by Surface number or Volume number. The reason for this is that I'm coupling regions with requiring dissimilar mesh densities; these regions are complex enough for me to feel apprehension at the thought of attempting to define geometric objects inside the regions to define mesh fields.
Is this approach possible? Thank you in advance, Mark. -- Dr. Mark Starnes Senior Physicist FT Technologies Church Lane Teddington TW11 8PA web: www.fttech.co.uk FT Technologies Limited is registered in England and Wales under registered number 01603909. Its registered office is at Church Lane, Teddington, Middlesex, TW11 8PA. The information in this message is confidential and is intended only for the use of the intended recipient(s). If you are not an intended recipient, you should not disclose, use or copy this information. Please contact the sender immediately if you have received this message in error. _______________________________________________ gmsh mailing list [email protected] http://www.geuz.org/mailman/listinfo/gmsh
