Hi everyone. I'm not sure if this email got through (it didn't appear for me so I presume not), so I'm resending it. Apologies if there are two copies! Geordie, I attempted to copy to your return email address but the message got bounced back; something about a spam filter. Anyway...
*snip* Hi Geordie, thanks for the rapid reply. Your example helped a great deal. Thanks! I went on with it, attempting to define the field for more than one surface, using MathEval to set the mesh size for an initial field, then defined a new second field for each surface using Restrict (following your example). Can you tell me how to combine these field definitions, please? I tried Min, Max, MathEval and MinAniso types to define my last field (referenced as the background field) but the element sizes in different regions all appear the same. I have attached my efforts (for what they are worth). Thanks again for the help. Best regards, Mark. On Wed, May 25, 2011 at 02:45:38AM +0100, Geordie McBain wrote: > 2011/5/25 Mark Starnes <[email protected]>: > > Hi everyone, > > > > Can you please tell me if it is possible to > > specify the size of elements in a region based on, for example, the > > region number and a transition distance? ?I usually define my > > element sizes during Point definitions and on > > occasion using Fields, but I have some geometries > > for which I would like to set the target element size by > > Surface number or Volume number. ?The reason for > > this is that I'm coupling regions with requiring > > dissimilar mesh densities; these regions are > > complex enough for me to feel apprehension at the > > thought of attempting to define geometric objects > > inside the regions to define mesh fields. > > > > Is this approach possible? > > Yes, use Restrict > <http://geuz.org/gmsh/doc/texinfo/gmsh.html#index-Restrict-309>. For > example, to refine just Plane Surface (9), use: > > Field[1] = MathEval; > Field[1].F = "0.1"; > > Field[2] = Restrict; > Field[2].IField = 1; > Field[2].FacesList = {9}; > > Background Field = 2; > > I attach a complete example. -- Dr. Mark Starnes Senior Physicist FT Technologies Church Lane Teddington TW11 8PA web: www.fttech.co.uk DDI: 0208 614 2730 FT Technologies Limited is registered in England and Wales under registered number 01603909. Its registered office is at Church Lane, Teddington, Middlesex, TW11 8PA. The information in this message is confidential and is intended only for the use of the intended recipient(s). If you are not an intended recipient, you should not disclose, use or copy this information. Please contact the sender immediately if you have received this message in error. Point (1) = {0, 0, 0}; // -*- c++ -*- Point (2) = {1, 0, 0}; Point (3) = {2, 0, 0}; Point (5) = {1, 1, 0}; Point (9) = {1, -1, 0}; Line(1) = {1, 2}; Line(2) = {2, 3}; Line(3) = {3, 5}; Line(5) = {5, 1}; Line(7) = {5, 2}; Line Loop(8) = {1, -7, 5}; Plane Surface (9) = {8}; Line Loop(10) = {7, 2, 3}; Plane Surface (11) = {10}; Line(12) = {1, 9}; Line(13) = {9, 2}; Line(14) = {9, 3}; Line Loop(15) = {1, -13, -12}; Plane Surface(16) = {15}; Line Loop(17) = {2, -14, 13}; Plane Surface(18) = {17}; Field[1] = MathEval; Field[1].F = "0.01"; // Sets the element size in the left region (9) Field[2] = MathEval; Field[2].F = "0.02"; // Sets the element size in the left region (9) Field[3] = MathEval; Field[3].F = "0.04"; // Sets the element size in the left region (9) Field[4] = Restrict; Field[4].IField = 1; Field[4].FacesList = {9}; Field[5] = Restrict; Field[5].IField = 2; Field[5].FacesList = {11}; Field[6] = Restrict; Field[6].IField = 3; Field[6].FacesList = {16}; // Field[7] = Min; // all elements are tiny. // Field[7] = Max; // all elements are large. // Field[7].FieldsList = {1,2,3,4,5}; // Field[7] = MathEval; // Field[7].F = "F4 + F5 + F6"; // All elements are the same size. // Field[7] = MinAniso; // Field[7].FieldsList = {4,5,6}; // All elements are large. Background Field = 7; _______________________________________________ gmsh mailing list [email protected] http://www.geuz.org/mailman/listinfo/gmsh ----- End forwarded message ----- -- Dr. Mark Starnes Senior Physicist FT Technologies Church Lane Teddington TW11 8PA web: www.fttech.co.uk DDI: 0208 614 2730 FT Technologies Limited is registered in England and Wales under registered number 01603909. Its registered office is at Church Lane, Teddington, Middlesex, TW11 8PA. The information in this message is confidential and is intended only for the use of the intended recipient(s). If you are not an intended recipient, you should not disclose, use or copy this information. Please contact the sender immediately if you have received this message in error. _______________________________________________ gmsh mailing list [email protected] http://www.geuz.org/mailman/listinfo/gmsh
