On 04/06/11 14:47, ANDREW LINDSAY wrote:
Hello,
This is my first posting to the group.
I am trying to create a mesh of a pipe that is insulated. The insulation will
have a radial cut out in the middle of the
joint with a different insulation material in this section.
I can create the model in 2D, but how to I rotate the 2D around the axis of
symetry to create the 3D pipe model?
Hi Andrew,
http://geuz.org/gmsh/doc/texinfo/gmsh.html#Transformations
But don't forget that Gmsh's native CAD engine does not support circles arcs >= Pi. Split your body into 3 pieces and
you'll be fine.
Regards,
Dave
--
David Colignon, Ph.D.
Collaborateur Logistique du F.R.S.-FNRS
CÉCI - Consortium des Équipements de Calcul Intensif
ACE - Applied & Computational Electromagnetics
Institut Montefiore B28
Université de Liège
4000 Liège - BELGIQUE
Tél: +32 (0)4 366 37 32
Fax: +32 (0)4 366 29 10
WWW: http://hpc.montefiore.ulg.ac.be/
Agenda: http://www.google.com/calendar/embed?src=david.colignon%40gmail.com
Any assistance would be appreciated.
Regards
Andrew Lindsay
_______________________________________________
gmsh mailing list
[email protected]
http://www.geuz.org/mailman/listinfo/gmsh
_______________________________________________
gmsh mailing list
[email protected]
http://www.geuz.org/mailman/listinfo/gmsh
