You may also try to mesh all the rest, load just the mesh (without the geometry), merge the geometry for the heat sink and remesh . The only problem could indeed be at the interface. Maybe you could try to have the interface already meshed, remove volume and interface from the heat sink geometry, and rebuild the volume of the heat sink using the meshed interface. I didn't test it myself, though.
HTH, Matthias ________________________________ Von: [email protected] [mailto:[email protected]] Gesendet: Donnerstag, 14. Juli 2011 09:05 An: [email protected] Cc: [email protected] Betreff: Re: [Gmsh] Load a partial mesh into Gmsh Hi Tibi, How about meshing all the components individually and saving the meshes, meshing the heatsink by itself and then combining all the meshes into the final one? It seems to me that the only difficulty is to match the meshes on the interface (hopefully, only one face). Regards, Serban From: [email protected] [mailto:[email protected]] On Behalf Of Tibi Chelcea Sent: 13 July 2011 22:54 To: [email protected] Subject: [Gmsh] Load a partial mesh into Gmsh I'm working on a system that simulates a family of components; these components are fixed (as in modeled once, and then re-used again and again), but the heatsinks attached to them are user-defined. Gmsh takes a long time to mesh this system, so I'd like to cut down the time used for meshing. I was wondering whether it's possible to use Gmsh as follows: - Pre-mesh each of the components and save these meshes - Then, when meshing the entire system (a component + an user-defined heatsink), Gmsh loads the mesh for the component, and meshes only the heatsink. Is this possible to do? I've seen some mentioning of "background mesh" in the documentation, but there is very little on that, and it's not clear whether it does what I'd like or how to define it. Any hint/help is really appreciated. Tibi Chelcea ______________________________________________________________________ Fujitsu Laboratories of Europe Limited Hayes Park Central, Hayes End Road, Hayes, Middlesex, UB4 8FE Registered No. 4153469 This e-mail and any attachments are for the sole use of addressee(s) and may contain information which is privileged and confidential. Unauthorised use or copying for disclosure is strictly prohibited. The fact that this e-mail has been scanned by Trendmicro Interscan does not guarantee that it has not been intercepted or amended nor that it is virus-free. _____________________________________________________________________ ERBE Elektromedizin GmbH Firmensitz: 72072 Tuebingen Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede Registergericht: Stuttgart HRB 380137
_______________________________________________ gmsh mailing list [email protected] http://www.geuz.org/mailman/listinfo/gmsh
