Hello Geordie,
Thank you for quick reply and your comments. I am actually new to to Gmsh
and don't know much of it's functions yet. I have drawn some simple
geometries using Gmsh and meshed them successfully. But i want to draw a
spline driven by an equation(such as y=sin(x)) and i was wondering
whether is it possible to draw this equation driven curve in Gmsh.
Thanks once again and waiting for your reply.
Thanks,
Rahul
On Tuesday 17 January 2012 04:00 AM, Geordie McBain wrote:
2012/1/16<[email protected]>:
Hello friends,
I am having problem making a simple geometry in Gmsh. I am trying to
make a cylinder with a bulge. The bulged part of the cylinder is based
on a 2D equation. The cylinder part is Ok but i am not able to draw the
bulged part of the cylinder in Gmsh. I tried to import the Iges file
from solidworks and save it as .geo file but the saved .geo has a lot of
splines in it. I was thinking is there a simpler way to draw this
geometry directly into Gmsh. I have attached IGS file for the same geometry.
Hello. It's usually better to Merge a CAD geometry into Gmsh and then
work with that; unrolling it as .geo is generally recommended against,
I believe. In this fashion, I have made an extremely coarse mesh of
your surface, as shown in the attached image. See
https://geuz.org/trac/gmsh/wiki/STLRemeshing for a proper example.
That approach certainly works, I have used it to generate
three-dimensional finite element meshes with millions of tetrahedra
for FreeFem++.
On the other hand if you do want to work at the .geo level, depending
on what your "2D equation" is like, you may well be able to define the
shape in .geo commands yourself. If it's a little too complicated for
that, you might be able to write a script in your preferred language
that writes the .geo file. Once you've constructed the generatrix, I
think Extrude with rotation should do the trick, shouldn't it?
<http://geuz.org/gmsh/doc/texinfo/gmsh.html#Extrusions>
_______________________________________________
gmsh mailing list
[email protected]
http://www.geuz.org/mailman/listinfo/gmsh
