On 12 Mar 2012, at 16:10, Lennie Song wrote: > Hello, > > I have used GMSH for a long time, which is really a nice program!! > BUT, I have got three questions to propose. > FIRSTLY, Open CASECADE has upgraded to 6.5.2, which has made a lot of > troubles for GMSH. Such as, since OCC 6.5.0 > , OCC abrogated the method Value() in many classes (fortunately, they > provided SquareDistance() instead), making function "OCC_Connect::cutmap_t > OCC_Connect::SelectCuttingEdges()" has to be changed. They also changed > BRepMesh_FastDiscret::Add() ， which nolonger accept one argument, making > statement "aMesher.Add(s)；“ in function "bool > OCCFace::buildSTLTriangulation(bool force)" failed! Hi - The SVN version has been modified to support this: give it a try. > SECONDLY, is there any method to draw a Polar Coordinate figure? Such > like diagrams in this web: > http://www.earsandgears.com/2010/10/28/microphone-directionality-%E2%80%93-polar-patterns/
No. I'd by happy to integrate any contributions adding such a feature. > THIRDLY, is there any method to draw different 2D lines in ONE diagram, > which is useful to compare different them? I know GMSH can draw different > different 2D lines in different view[], but they are in different diagrams. I > also googled an example: > http://www.uker.net/Article/UploadFiles/200704/20070420114003542.bmp > Same thing. Ch. > Thanks! > Lennie Song 2012-3-12 > _______________________________________________ > gmsh mailing list > [email protected] > http://www.geuz.org/mailman/listinfo/gmsh -- Prof. Christophe Geuzaine University of Liege, Electrical Engineering and Computer Science http://www.montefiore.ulg.ac.be/~geuzaine _______________________________________________ gmsh mailing list [email protected] http://www.geuz.org/mailman/listinfo/gmsh
