Hi, I've a got a strange behaviour with latest debian gmsh package (svn rev 11650) build without tetgen support but with mmg3d support.
Try to mesh the cubeaniso example I had this error: Error : Tetgen is not compiled in this version of Gmsh either using gmsh gmsh-ani.geo -3 -algo bamg -algo mmg3d or adding into geo file : Mesh.Algorithm = 7; //Bamg Mesh.Algorithm3D= 7; //mmg3d Is this normal??? Best C
Mesh.Algorithm = 7; //Bamg
Mesh.Algorithm3D= 7; //mmg3d
lc = 0.1;
Point(1) = {0.0,0.0,0.0,lc};
Point(2) = {1,0.0,0.0,lc};
Point(3) = {1,1,0.0,lc};
Point(4) = {0,1,0.0,lc};
Line(1) = {4,3};
Line(2) = {3,2};
Line(3) = {2,1};
Line(4) = {1,4};
Line Loop(5) = {2,3,4,1};
Plane Surface(6) = {5};
Extrude Surface { 6, {0,0.0,1} };
Physical Surface("bottom") = {6};
Physical Surface("top") = {28};
Physical Surface("cooling") = {15, 23};
Physical Surface("glue") = {19, 27};
Physical Volume("omega") = {1};
/*
Field[1] = Attractor;
Field[1].FacesList = {23};
Field[1].NNodesByEdge = 100;
Field[2] = Threshold;
Field[2].IField = 1;
Field[2].DistMax = 0.3;
Field[2].DistMin = 0.05;
Field[2].LcMax = 0.1;
Field[2].LcMin = 0.01;
Background Field = 2;
Field[3] = BoundaryLayer;
Field[3].IField = 1;
Field[3].hfar = 0.1;
Field[3].hwall_n = 0.005;
Field[3].hwall_t = 0.1;
Background Field = 3;
*/
/*
Field[1] = BoundaryLayer;
Field[1].FaceList = {23};
Field[1].hfar = 0.01;
Field[1].hwall_n = 0.005;
Field[1].hwall_t = 0.1;
Field[1].ratio = 1.0;
Field[1].thickness = 0.5;
Background Field = 1;
*/
Field[1] = MathEvalAniso;
Field[1].m11 = "1./(0.1)^2";
Field[1].m12 = "0";
Field[1].m13 = "0";
Field[1].m22 = "y+1/(0.005)^2";
Field[1].m23 = "0";
Field[1].m33 = "1/(0.1)^2";
Background Field = 1;
signature.asc
Description: This is a digitally signed message part
_______________________________________________ gmsh mailing list [email protected] http://www.geuz.org/mailman/listinfo/gmsh
