Dear Gmsh User Group: I am using Gmsh for Post-Processing of my Problem, an Airfoil.
My Solver output is: 3-D Displacements (3x1) at each node, 3-D Strains (6x1) within each element, and 3-D Stresses (6x1) within each element. My Question is: How to Plot Contours for 3-D Displacements / Strains / Stresses ? I converted my Solver output into .pos Format of Gmsh to see the Contours but I couldn't get nice Contours. My Observation & Question is: How to give " # list-of-values " in the .pos File ? Please see the Contour Plot for 3-D Displacement (U1) in the link: https://sites.google.com/site/shrisaihemarajupollayi/gmsh The corresponding .pos File (ShriSai_RealBlade_New.U.pos) also included for your reference. Please E-mail me back if You have any suggestions/comments to improve the Contour Plot. Thanks !!! Yours Sincerely, Raju Regards ================ Hemaraju Pollayi, Ph.D. Post-Doctoral Research Fellow Advisor: Prof. Wenbin Yu (PhD, Georgia Tech; Post-Doc, Georgia Tech) Solid Mechanics and Structures Lab Department of Mechanical and Aerospace Engineering Utah State University Logan, Utah, USA 84322-4130 E-Mail: [email protected] [email protected] More Information: https://sites.google.com/site/shrisaihemarajupollayi/
_______________________________________________ gmsh mailing list [email protected] http://www.geuz.org/mailman/listinfo/gmsh
