hello with build 20120525 it works ok thanks
jean pierre aubry Le Wed, 23 May 2012 15:50:41 +0200, Christophe Geuzaine <[email protected]> a écrit : > > On 23 May 2012, at 05:39, jean pierre aubry wrote: > > > here is an example only lines, 36, and nodes, 36, no surfaces > > Hi Jean-Pierre - The example works on my machine; did you maybe just > forget to display the mesh nodes and line elements (which are hidden > by default)? > > > Le Tue, 22 May 2012 19:44:11 +0200, > > Christophe Geuzaine <[email protected]> a écrit : > > > >> > >> On 22 May 2012, at 14:38, jean pierre aubry wrote: > >> > >>> hello > >>> > >>> when i try to read a .med file (one containing a mesh, no results) > >>> produced by Salome i get the following console lines > >>> Info : Reading > >>> '/dedalus/salome/examples/jacopo/Model_Test/CAE12_002_12.mail.med'... > >>> Info : Reading MED file V3.0.4 using MED library V3.0.2 > >>> Info : Reading 3-D unstructured mesh <<COMPLESSIVO>> Info : > >>> Done reading > >>> '/dedalus/salome/examples/jacopo/Model_Test/CAE12_002_12.mail.med' > >>> but nothing appears on the screen when i do Tools>Statics>Mesh i > >>> can see O Nodes on Lines, O for every entry i can read the same > >>> file with Salome > >>> > >> > >> Hello Jean-Pierre - Can you send a (small) test file? > >> > >>> > >>> and i can read any med file created within Gmsh > >>> > >>> any idea of what is wrong > >>> > >>> jean pierre aubry > >>> > >>> _______________________________________________ > >>> gmsh mailing list > >>> [email protected] > >>> http://www.geuz.org/mailman/listinfo/gmsh > >> > > > > <grille_nl.mail.med> > _______________________________________________ gmsh mailing list [email protected] http://www.geuz.org/mailman/listinfo/gmsh
