Hi all, I know the reason now... I mistakenly changed the global element size factor in Gmsh2.6.2 in Linux. If I reset the factor to 1.0, the results under Windows and Linux are the same.
Best, Ziyu On Wed, Apr 24, 2013 at 4:41 PM, Ziyu ZHANG <[email protected]> wrote: > Hi all, > > Attached are the mesh generated by Gmsh2.6.2 on Windows and Linux from the > same .geo file. For upper block the characteristic length is set to 0.4 and > for the lower one 4.0. The results for Windows look correct because the > upper block is a 3 by 3 one, yielding 3/0.4 = 7.5 elements for each side, > which is exactly the case for the Windows results. I am wondering why Linux > version generated smaller elements and is there some way to fix this? > > Best, > > Ziyu > > -- > Ziyu ZHANG > PhD Student > Duke Computational Mechanics Laboratory > Department of Civil & Environmental Engineering > Duke University > Office: 919-660-5031 > -- Ziyu ZHANG 張子瑜 PhD Student Duke Computational Mechanics Laboratory Department of Civil & Environmental Engineering Duke University Office: 919-660-5031
_______________________________________________ gmsh mailing list [email protected] http://www.geuz.org/mailman/listinfo/gmsh
