On 17 Jan 2014, at 03:29, Ziyu ZHANG <[email protected]> wrote:
> Dear Gmsh team, > > I have got the attached GEO file and POS file to get a refined mesh. But when > I type > > gmsh It3xxx.geo -3 -bgm It3003.pos -o It3004.msh > > Gmsh crashes with errors saying "faces intersect" and "element has two > identical points" ect... I searched previous questions and someone says it is > because some characteristic length is too small. However, I am not sure this > is true in my case. Could you please take a look and give some advice? > Dear Ziyu, Thanks for the report: this was caused by a badly chosen tolerance when the background field mesh is not connected. Give tomorrow's nightly build a try: it should fix the problem. Christophe > Best, > > Ziyu > > -- > Ziyu ZHANG 張子瑜 > PhD Student > Duke Computational Mechanics Laboratory > Department of Civil & Environmental Engineering > Duke University > Office: 919-660-5031 > <It3xxx.geo><It3003.pos>_______________________________________________ > gmsh mailing list > [email protected] > http://www.geuz.org/mailman/listinfo/gmsh -- Prof. Christophe Geuzaine University of Liege, Electrical Engineering and Computer Science http://www.montefiore.ulg.ac.be/~geuzaine _______________________________________________ gmsh mailing list [email protected] http://www.geuz.org/mailman/listinfo/gmsh
