Le 6 févr. 2014 à 16:49, Christophe Geuzaine <[email protected]> a écrit :
> > On 03 Feb 2014, at 11:03, [email protected] wrote: > >> Hello everybody >> >> I would like if it’s possible to handle with several options in the same geo >> file. >> >> I join an exemple where I need to have Mesh.Algorihm=2 & >> Mesh.CharacteristicLengthExtendFromBoundary=0 for the red surface >> And have Mesh.Algorihm=5 & Mesh.CharacteristicLengthExtendFromBoundary=1 for >> the other surface >> >> I’m not sure it’s possible to have differents options in the same geo file >> or mesh the surfaces one after the other. >> In this case, what the best method to mesh surfaces with differents options ? >> > > Unfortunately it's currently not possible; these options are global. > > Not all indeed : MeshAlgorithm Surface {1,2,3} 6; allows algorithm 6 (frontal) to be applied to surface 1, 2 and 3 JF >> Thanks >> >> Best regards >> >> Thierry >> <several.geo><several2.geo><surface1.png><surface2.png>_______________________________________________ >> gmsh mailing list >> [email protected] >> http://www.geuz.org/mailman/listinfo/gmsh > > -- > Prof. Christophe Geuzaine > University of Liege, Electrical Engineering and Computer Science > http://www.montefiore.ulg.ac.be/~geuzaine > > > > > _______________________________________________ > gmsh mailing list > [email protected] > http://www.geuz.org/mailman/listinfo/gmsh ------------------------------------------------------------------ Prof. Jean-Francois Remacle Universite catholique de Louvain (UCL) Ecole Polytechnique de Louvain (EPL) - Louvain School of Engineering Institute of Mechanics, Materials and Civil Engineering (iMMC) Center for Systems Engineering and Applied Mechanics (CESAME) Tel : +32-10-472352 -- Mobile : +32-473-909930
_______________________________________________ gmsh mailing list [email protected] http://www.geuz.org/mailman/listinfo/gmsh
