Hi everyone, I figured out what my problem was: one of the STL file was mis-written and was empty. I changed it and now everything is working fine !
Best regards, V. 2014-03-12 17:34 GMT-05:00 Vincent Thierry Libertiaux <[email protected]>: > Greetings to the gmsh community, > > First of all, I would like to thank Mr Geuzaine and Remacle, and all the > other contributors, for the constant development of the software and the > great support to the community ! > > I am back using gmsh after advocating using it as our main mesher when I > was working at the University of Liege a few years ago ! > > Here is the description of my problem: I used vtk to produce surface > meshes of different eye tissues. Those meshes can be either in the vtk or > stl format. I then created a geo file for both type of format and run gmsh > 2.8 from the command line with the -3 and -order 2 options. > > When I use the vtk files, I obtain what looks like a satisfactory result. > However, when I look a the .msh file, the information relative to the > physical surfaces/volumes is lost: it always puts the first label of my > surface/volume list. > > When I use the stl files, it looks like the physical surfaces labels are > correct, as is the first physical volume label, but I think that only this > one is meshed (I have 5 volumes). > > In both cases, I have an error when I load the file indicating "unknown > surface". This happens only once for the stl files, and it is always the > last one that is incriminated; and multiple times in the case of the vtk > files. > > I researched for that kind of problem in the archives but unsuccessfully. > > I hope that someone will be able to help me with that issue. > > I joined all the files needed to make some tests. > > I thank you very much in advance, > > Best regards, > > Vincent > > _______________________________________________ > gmsh mailing list > [email protected] > http://www.geuz.org/mailman/listinfo/gmsh > >
_______________________________________________ gmsh mailing list [email protected] http://www.geuz.org/mailman/listinfo/gmsh
