There is not much I can tell you. You can try yourself the options under
Tools->Options->Mesh, e.g. different algorithms (Delaunay, Frontal) for 2D and
3D meshing ("General" tab), "compute element sizes from curvature" ("Advanced"
tab), etc. It's a bit trial and error.
BTW, you'd better put the gmsh list on CC if you want to give other people on
the list a chance to reply to your posts.
HTH,
Matthias
Von: e r [mailto:[email protected]]
Gesendet: Montag, 19. Mai 2014 10:48
An: Zenker, Dr. Matthias
Betreff: RE: AW: AW: [Gmsh] 3D MESH DONE.... WITHOUT 3D ELEMENTS
Thank you very much mr Matthias for your interesting.
can you propose me a combination of options for a 3d mesh to a curved volume ?
Thank you again for your help
Hi,
in my gmsh (2.8.3, Windoze 7) I don't see a volume in Tools->Visibility. AFAIK
the OCC error indicates that gmsh has problems importing your geometry. It
seems to contain some free-form surfaces, and I don't know how good gmsh is
with those.
I cannot help you further here, sorry - I am not a gmsh developer, and I don't
know all about gmsh...
Let's hope that someone of the real gmsh gurus reads this post and has the time
to look into your case.
Matthias
Von: e r [mailto:[email protected]]
Gesendet: Montag, 19. Mai 2014 10:28
An: Zenker, Dr. Matthias
Betreff: RE: AW: [Gmsh] 3D MESH DONE.... WITHOUT 3D ELEMENTS
How can I check out this? . In the Visibility menu appears that there is a
volume which connects all the surfaces.
And one more
when I try some options (like Mesh.SecondOrderIncomplete=1;) I get the
following Erros OCC Project Point on surface FaiL
Please help me because I have a DeadLine.....
________________________________
From: [email protected]<mailto:[email protected]>
To: [email protected]<mailto:[email protected]>
Subject: AW: [Gmsh] 3D MESH DONE.... WITHOUT 3D ELEMENTS
Date: Mon, 19 May 2014 08:14:25 +0000
Hi,
your geometry does not contain any volumes, so no 3D mesh possible.
HTH,
Matthias
Von: e r [mailto:[email protected]]
Gesendet: Samstag, 17. Mai 2014 13:51
An: [email protected]<mailto:[email protected]>
Betreff: [Gmsh] 3D MESH DONE.... WITHOUT 3D ELEMENTS
Hi
I want to create a 3d mesh for my thesis to the following step file but I
cannot. The only thing that gmsh produce are triangle elements.
Can you help me with this please....
_____________________________________________________________________
ERBE Elektromedizin GmbH
Firmensitz: 72072 Tuebingen
Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede
Registergericht: Stuttgart HRB 380137
_____________________________________________________________________
ERBE Elektromedizin GmbH
Firmensitz: 72072 Tuebingen
Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede
Registergericht: Stuttgart HRB 380137
_____________________________________________________________________
ERBE Elektromedizin GmbH
Firmensitz: 72072 Tuebingen
Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede
Registergericht: Stuttgart HRB 380137
_______________________________________________
gmsh mailing list
[email protected]
http://www.geuz.org/mailman/listinfo/gmsh
