> On 06 Mar 2015, at 18:11, Mark Mccrea <[email protected]> wrote: > > Good day. > > I have recently started to have some problems with using gmsh and Elmer to > create field maps for use in Garfield++. Initially using Gmsh 2.6.1 with > Elmer library version 7.0 (rev 6109M) under MacOsX 10.8.5 the meshing and > solving worked. For larger meshes and more events I am trying to move to my > groups simulation server. > > My meshing and solver commands are: > > gmsh n3HeTarget.geo -3 -order 2 > > ElmerGrid 14 2 n3HeTarget.msh -autoclean > > ElmerSolver n3HeTarget-400V.sif > > When moving to the server it was required to update gmsh from 2.6.1 for > 64bit support. I went to gmsh2.8.5. I also changed to the newest (at the > time) Elmer, version 7 (rev7023). > > Now using the same input files the meshing and elmergrid seem to work but the > ElmerSolver now finds a large number of degenerate points in the mesh and > gives error messages of the form: > > ERROR:: ElementMetric: Degenerate 3D element: 191783 > ElementMetric: DetG: -1.735E-18 > ElementMetric: Node: 1 Coord: 9.754E-01 6.739E+00 1.270E+00 > ElementMetric: Node: 2 Coord: 9.754E-01 6.439E+00 1.270E+00 > ElementMetric: Node: 3 Coord: 1.474E+00 6.888E+00 1.233E+00 > ElementMetric: Node: 4 Coord: 1.474E+00 6.289E+00 1.233E+00 > ElementMetric: Node: 5 Coord: 9.754E-01 6.589E+00 1.270E+00 > ElementMetric: Node: 6 Coord: 1.225E+00 6.664E+00 1.252E+00 > ElementMetric: Node: 7 Coord: 1.225E+00 6.813E+00 1.252E+00 > ElementMetric: Node: 8 Coord: 1.225E+00 6.514E+00 1.252E+00 > ElementMetric: Node: 9 Coord: 1.225E+00 6.364E+00 1.252E+00 > ElementMetric: Node: 10 Coord: 1.474E+00 6.589E+00 1.233E+00 > ElementMetric: Node: 2 dCoord: 0.000E+00 -2.995E-01 0.000E+00 > ElementMetric: Node: 3 dCoord: 4.987E-01 1.497E-01 -3.653E-02 > ElementMetric: Node: 4 dCoord: 4.987E-01 -4.492E-01 -3.653E-02 > ElementMetric: Node: 5 dCoord: 0.000E+00 -1.497E-01 0.000E+00 > ElementMetric: Node: 6 dCoord: 2.493E-01 -7.487E-02 -1.827E-02 > ElementMetric: Node: 7 dCoord: 2.493E-01 7.487E-02 -1.827E-02 > ElementMetric: Node: 8 dCoord: 2.493E-01 -2.246E-01 -1.827E-02 > ElementMetric: Node: 9 dCoord: 2.493E-01 -3.744E-01 -1.827E-02 > ElementMetric: Node: 10 dCoord: 4.987E-01 -1.497E-01 -3.653E-02 > > it tries to complete the field solution and looks like it might have worked > but the field is wrong or won't load in Garfield++. So while the first error > message is given by ElmerSolver but the the .msh generated by gmsh2.8.5 and > elmergrid is significantly reduced in size (file size and node count) > compared to the original mesh made with gmsh2.6.1, > > Opening either mesh in gmsh seems to look good, all of the physical volumes > and the overall mesh volume look good, and similar. > > Has anyone had similar problems? > > or know if the .msh output format has changed? >
Can you try "gmsh n3HeTarget.geo -3 -order 2 -optimize" ? (You forgot to attach the included gf_*.geo geometry files) > My .geo and .sif files are attached as well as a terminal logs for each setup > showing what was done. > > Mark McCrea > <n3HeTarget.geo><n3HeTarget-400V.sif><TerminalLog-gmsh285onserver-mesh-solve2015_03_05.txt><TerminalLog-gmsh261onserver-mesh-solve2015_03_06.txt>_______________________________________________ > gmsh mailing list > [email protected] > http://www.geuz.org/mailman/listinfo/gmsh -- Prof. Christophe Geuzaine University of Liege, Electrical Engineering and Computer Science http://www.montefiore.ulg.ac.be/~geuzaine _______________________________________________ gmsh mailing list [email protected] http://www.geuz.org/mailman/listinfo/gmsh
