Thanks Alex, I'll try what you suggest and comment my results. Regards,
El lunes, 18 de mayo de 2015, 8:52:06 (UTC+2), Alexander Tismer escribió: > > Hi Javier, > > my case was a little bit different. I also try to put a layer on hub and > shroud. This did not work well in my case. I always end in troubles with an > intersecting surface mesh. > > You can also try to use the PostBL tool from the MeshKit library. > > Best regards > Alex > > On 05/17/2015 01:16 AM, Javier de la Sierra wrote: > > I answer to myself so this can be useful for other users. > I finally could mesh my 3D wing. I summarize what I have corrected in my > geo file: > > - No nodes selected in the BL field >>> "Field[1].NodesList =" > sentence deleted. > - In "Field[1].EdgesList =" i have chosen those edges which were the > intersection between the wing surface and the box wall. > - In "Field[1].FacesList" I have chosen all surfaces belonging to the > wing. > - I don't know yet the meaning of "Field[1].IntersectMetrics" but I > set it to 1. >> Field[1].IntersectMetrics = 1; > > I attach the geo and step file and a picture of my mesh. > > Regards, > El sábado, 16 de mayo de 2015, 18:03:31 (UTC+2), Javier de la Sierra > escribió: >> >> I attach the images: >> >> 1. 2D airfoil with OK BL (whitcomb2.geo, attached in previous message) >> 2. Detail of BL in 3D wing (ala.geo, attached in previous message) >> 3. General view of 3D wing mesh, with weird mesh (ala.geo, attached >> in previous message) >> >> Sorry for posting 3 messages, but i had problems with images in first >> message. >> >> Thanks for your help. >> > > -- > Alexander Tismer > > Institut für Strömungsmechanik > und Hydraulische Strömungsmaschinen > Universität Stuttgart > Pfaffenwaldring 10 > 70550 Stuttgart > > Tel.: +49 (0) 711 / 685 63007 > Fax: +49 (0) 711 / 685 63255 > eMail: [email protected] > <javascript:>http://www.ihs.uni-stuttgart.de > >
_______________________________________________ gmsh mailing list [email protected] http://www.geuz.org/mailman/listinfo/gmsh
