I, imported the step-file and tried to mesh ist.
The import of the geometry works nearly fine.
All needed points and lines are there, but if I try to crate a surface
from the small pipe in my example it creates no/wrong surface.
What are the steps to create a surface from the thre nurbs and one line
to get the surface of the pipe wall?
Am 21.05.2015 um 20:21 schrieb Christophe Geuzaine:
On 20 May 2015, at 10:26, Maik Hoffmann <[email protected]> wrote:
Hello,
I need a mesh for BEM analysis. I created the part with with FreeCad (cad.png)
and imported the step-file into Gmsh. That works fine. Some surfaces were
already created. Now I tried to create the surface for the small tube, but I
got only the surface of the opening of the tube not for the wall (mesh.png).
What have I to do for it. I choose 'Add/Ruled Surface' and selected the nurbs
and the line between them.
You cannot export your .step file as a .geo file: Gmsh should mesh the .step
file directly - see previous messages on the list for more detailed information.
Thanks
Maik
--
wissenschaftlicher Mitarbeiter
Lehrstuhl Allgemeine Elektrotechnik und Messtechnik (AEMT)
Fakultät Maschinenbau, Elektrotechnik und Wirtschaftsingenieurwesen
Brandenburgische Technische Universität Cottbus
Siemens-Halske-Ring 14
D-03046 Cottbus
Tel.: +49-355-69-3425
Fax: +49-355-69-4104
http://www.tu-cottbus.de/fakultaet3/de/elektrotechnik-messtechnik/
<mesh.png><cad.png><pipesection4.geo>_______________________________________________
gmsh mailing list
[email protected]
http://www.geuz.org/mailman/listinfo/gmsh
--
wissenschaftlicher Mitarbeiter
Lehrstuhl Allgemeine Elektrotechnik und Messtechnik (AEMT)
Fakultät Maschinenbau, Elektrotechnik und Wirtschaftsingenieurwesen
Brandenburgische Technische Universität Cottbus
Siemens-Halske-Ring 14
D-03046 Cottbus
Tel.: +49-355-69-3425
Fax: +49-355-69-4104
http://www.tu-cottbus.de/fakultaet3/de/elektrotechnik-messtechnik/
_______________________________________________
gmsh mailing list
[email protected]
http://www.geuz.org/mailman/listinfo/gmsh
