On 22/06/15 14:05, Simone Falco wrote:
Hello,
I am trying to generate a 3D mesh of a prismatic domain with a concave -
Voronoi based - inclusion that shares 2 faces with the
prism (see attached file).
However, the software seems unable to recognise the volume formed by the prism
and inclusion faces, despite the fact that the
surfaces bound a closed volume.
Does anybody have any suggestion that could help me?
Dear Simone,
a lot of the lines of your inclusion are defined twice:
Line (5) = {117 , 113};
...
Line (106) = {113 , 117};
If you add:
Coherence;
at the end of your file in order to remove duplicates, you will be able to
define the volume you want.
Regards,
Dave
--
David Colignon, Ph.D.
1er Logisticien de Recherche
Université de Liège
ACE - Applied & Computational Electromagnetics
Quartier POLYTECH 1 - Montefiore B28
Allée de la découverte 10
4000 Liège - BELGIQUE
Tél: +32 (0)4 366 37 32
http://www.ulg.ac.be/nic4
Best regards
Simone
----------------------------------------------------
Simone Falco
DPhil student, department of Engineering
Impact Engineering Laboratory
University of Oxford
_______________________________________________
gmsh mailing list
[email protected]
http://www.geuz.org/mailman/listinfo/gmsh
_______________________________________________
gmsh mailing list
[email protected]
http://www.geuz.org/mailman/listinfo/gmsh
