Dear Prof. Geuzaine, Thank you very much for your reply.
May I ask how you discovered that the curves were overlapping? It could help me to debug this and further problems Kind regards, Aleksejs On 15.11.2015 15:19, Christophe Geuzaine wrote: > >> On 11 Nov 2015, at 10:53, Aleksejs Fomins <[email protected] >> <mailto:[email protected]>> wrote: >> >> Dear GMSH, >> >> I have a model for a cavity simulation necessary for my PhD. >> >> 2D mesh works fine, 3D mesh throws a bunch of warnings like >> >> Warning : Converged for i=7 j=5 (err=1.81843e-08 iter=2) BUT xyz error = >> 12.5473 in point (-1.604927e+01,-5.104927e+01,4.445920e+01) on surface 123 >> >> and produces a completely rubbish mesh. I attach the geometry and the full >> error log. >> > > The geometry seems wrong: there are overlapping curves (orphaned, colored in > orange in the attached picture). > > >> Any advice would be appreciated. >> >> Kind regards, >> Aleksejs Fomins >> <cavity-rectangular-rev-1400.geo><error.txt>_______________________________________________ >> gmsh mailing list >> [email protected] <mailto:[email protected]> >> http://www.geuz.org/mailman/listinfo/gmsh > > -- > Prof. Christophe Geuzaine > University of Liege, Electrical Engineering and Computer Science > http://www.montefiore.ulg.ac.be/~geuzaine > > Tetrahedron V, July 4-5 2016: http://tetrahedron.montefiore.ulg.ac.be > Free software: http://gmsh.info | http://getdp.info | http://onelab.info > _______________________________________________ gmsh mailing list [email protected] http://www.geuz.org/mailman/listinfo/gmsh
