Hello, I experience difficulties creating a pure or at least Hex-dominant mesh for the model in the text file. I tried a lot of solver options but even with the frontal algorithm and AllHexas subdivision algorithm I cannot get a proper mesh. Volume elements are only created for the left and right volume while the boundary surfaces of the middle volume are meshed but no volumes are created and different errors are thrown by gmsh, e.g.
"Cannot use frontal 3D algorithm with quadrangles on boundary" for frontal 3D Is there any way that I am missing? Do I somehow have to mesh the middle volume first? Best regards Martin Rädel ------------------------ Deutsches Zentrum für Luft- und Raumfahrt e.V. (DLR) German Aerospace Center Institute of Composite Structures and Adaptive Systems | Structural Mechanics | Lilienthalplatz 7 | 38108 Braunschweig | Germany Dipl.-Ing. Martin Rädel Telephone +49 (0)531 295-2048 | Telefax +49 (0)531 295-2232 | [email protected]<mailto:[email protected]> www.DLR.de<http://www.dlr.de/>
geometry_minimal_3D.geo
Description: geometry_minimal_3D.geo
_______________________________________________ gmsh mailing list [email protected] http://onelab.info/mailman/listinfo/gmsh
