I have performed simulations in which my reference pressure and reference temperature values were 1 bar and 263 K. I don´t have many knowledges about the Tau_t and Tau_p values, so I performed many simulations to evaluate these parameter in my system, in order to get pressure and temperature close to these values. I observed in the forum that most users uses as standard tau_t = 0,1 and tau_p = 1,0, but the values that I obtain in my case are far away from the reference ones when I use these "standard" values.
I made tests with tau_p = 1, and tau_t I varied from 0,500 until 0,001. Only close to 0,005 I have pressure and temperature close to the reference values. But I don´t know if it is all right to work with so low values for tau_t. Does anybody has experience with such low values? What would be the consequences by using these values?
Thank you once more for your attention,
Best regards,
Fernando Mattio
_______________________________________________ gmx-users mailing list [email protected] http://www.gromacs.org/mailman/listinfo/gmx-users Please don't post (un)subscribe requests to the list. Use the www interface or send it to [EMAIL PROTECTED] Can't post? Read http://www.gromacs.org/mailing_lists/users.php
