Hi, I put a new cooler (Thermaltake Friock) on the CPU. The problem is solved.
2012/2/4 Mark Abraham <[email protected]> > On 4/02/2012 11:15 PM, ahmet yıldırım wrote: > > Hi, > The problem might caused by X58 chipset. > Now I am using ubuntu. Which operating system do you recommend? > > > I doubt it is relevant at all. > > Mark > > > 2012/2/4 David van der Spoel <[email protected]> > >> On 2012-02-03 23:49, ahmet yıldırım wrote: >> >>> Dear Mark, >>> >>> >>> Believe me, I tried all methods that you said but unfortunately the >>> result doesnt change :( >>> >> >> It used to be like this that GROMACS ran more efficient on AMD cpus than >> the official AMD burn-in code, and therefore also hotter. You could run >> gromacs on fewer cores to see if that helps, but it seems like a hardware >> problem. Have any warranty on your computers? >> >> >>> 2012/2/4 Mark Abraham <[email protected] >>> <mailto:[email protected]>> >>> >>> >>> On 4/02/2012 8:24 AM, ahmet yıldırım wrote: >>> >>>> Dear users, >>>> >>>> I am using ubuntu 11.1 (64 bit). The Ubuntu normally runs when I >>>> dont run the Gromacs program. i.e there is not heating problem. >>>> But the CPU is excessive heating (82 degree) when I run the gromacs. >>>> >>> >>> There are various "stress test" programs you can get if you Google >>> around. I expect these will produce the same symptoms. >>> >>> >>> I am using the all cores at 100%. Now I have 2 PC.I use them >>>> >>>> separately >>>> 1.first: It has Intel i7 920 CPU and Asus P6T SE motherboard >>>> 2.second: It has Intel I7 960 and Gıgabyte x58A-UD5 LGA 1366 >>>> motherboard >>>> I have the problem of warming/overheating on both computers. I >>>> could not figure out this problem for two weeks :( >>>> By the way: >>>> -I dont use an older compiler to get the binary. I am using gcc >>>> 4.6 and I am using Gromacs 4.5.4 >>>> -I watch the temperatures by "lm sensor" program >>>> -I installed ubuntu 32-bit but the result didnt change again >>>> -I have sufficient cooling on both PC >>>> >>> >>> I'd say this is evidence that you don't have sufficient cooling. >>> >>> >>> It is likely something related to the program because no problem >>>> with any hardware related to computers according to experts say. >>>> >>> >>> If things are installed correctly. For example, cheap thermal paste >>> between the CPU and heat sink can cause these symptoms. >>> >>> >>> >>>> what do you suggest? :( >>>> >>> >>> Get more cooling. Maybe lower the clock speed (if possible). Run a >>> less efficient MD code! >>> >>> Mark >>> >>> >>> >>>> *atk0110-acpi-0 >>>> >>>> Adapter: ACPI interface >>>> Vcore Voltage: +1.22 V (min = +0.80 V, max = +1.60 V) >>>> +3.3 Voltage: +3.31 V (min = +2.97 V, max = +3.63 V) >>>> +5 Voltage: +5.00 V (min = +4.50 V, max = +5.50 V) >>>> +12 Voltage: +12.03 V (min = +10.20 V, max = +13.80 V) >>>> CPU FAN Speed: 2163 RPM (min = 600 RPM) >>>> CHASSIS1 FAN Speed: 0 RPM (min = 600 RPM) >>>> CHASSIS2 FAN Speed: 2033 RPM (min = 600 RPM) >>>> POWER FAN Speed: 0 RPM (min = 0 RPM) >>>> CPU Temperature: +82.0°C (high = +60.0°C, crit = +75.0°C) >>>> MB Temperature: +45.0°C (high = +45.0°C, crit = +75.0°C) >>>> >>>> radeon-pci-0200 >>>> Adapter: PCI adapter >>>> temp1: +60.5°C * >>>> >>>> >>>> -- >>>> Ahmet Yıldırım >>>> >>>> >>>> >>>> >>> >>> -- >>> gmx-users mailing list [email protected] >>> <mailto:[email protected]> >>> >>> http://lists.gromacs.org/mailman/listinfo/gmx-users >>> Please search the archive at >>> http://www.gromacs.org/Support/Mailing_Lists/Search before posting! >>> Please don't post (un)subscribe requests to the list. Use the >>> www interface or send it to [email protected] >>> <mailto:[email protected]>. >>> >>> Can't post? Read http://www.gromacs.org/Support/Mailing_Lists >>> >>> >>> >>> >>> -- >>> Ahmet Yıldırım >>> >>> >>> >>> >> >> -- >> David van der Spoel, Ph.D., Professor of Biology >> Dept. of Cell & Molec. Biol., Uppsala University. >> Box 596, 75124 Uppsala, Sweden. Phone: +46184714205. >> [email protected] http://folding.bmc.uu.se >> >> -- >> gmx-users mailing list [email protected] >> http://lists.gromacs.org/mailman/listinfo/gmx-users >> Please search the archive at >> http://www.gromacs.org/Support/Mailing_Lists/Search before posting! >> Please don't post (un)subscribe requests to the list. Use the www >> interface or send it to [email protected]. >> Can't post? Read http://www.gromacs.org/Support/Mailing_Lists >> > > > > -- > Ahmet Yıldırım > > > > > > -- > gmx-users mailing list [email protected] > http://lists.gromacs.org/mailman/listinfo/gmx-users > Please search the archive at > http://www.gromacs.org/Support/Mailing_Lists/Search before posting! > Please don't post (un)subscribe requests to the list. Use the > www interface or send it to [email protected]. > Can't post? Read http://www.gromacs.org/Support/Mailing_Lists > -- Ahmet Yıldırım
-- gmx-users mailing list [email protected] http://lists.gromacs.org/mailman/listinfo/gmx-users Please search the archive at http://www.gromacs.org/Support/Mailing_Lists/Search before posting! Please don't post (un)subscribe requests to the list. Use the www interface or send it to [email protected]. Can't post? Read http://www.gromacs.org/Support/Mailing_Lists
