2007/6/4, Prathap KV <[EMAIL PROTECTED]>:
I am a newbie to GNASH.Can anyone please tell me the step by step procedure to follow to cross compile GNASH and port it on arm based PXA-255 board.
Hi You will find some notes and a pointer to another document in the current manual at the end of the "Configuring the code" section. See http://www.gnu.org/software/gnash/manual/cvshead.html#configure -> Cross compiling and configuration. I haven't tried this myself yet (it's on the list...), however it has been x-compiled successfully and the Gnash environment is set up to enable cross-compiling.
I successfully cross compiled Qt-embedded and ported its libraries on my board. I am totally confused,how to give qt-embedded support to GNASH.
I guess you will need the QTE header files installed also on your host machine as well as a set of the cross-compiled libraries also on the host to link against and configure with a load of of --with-qt-includes=/bla/bla/bla and --with-qt-libs=/some/where/else and similar stuff for the other libraries. If this all sounds bewildering and your board has 128MB RAM, you may get there sooner by compiling everything natively on it. 64MB is not enough due to one or two huge source files. Good luck, let us know how you get on M _______________________________________________ Gnash-dev mailing list [email protected] http://lists.gnu.org/mailman/listinfo/gnash-dev
