On Dec 22, 2009, Wu Zhangjin <[email protected]> wrote: > http://dev.lemote.com/code/rt4ls/attachment/wiki/linux-loongson-standby-howto/standby-tools-0.2.tar.gz
> 2.6.31 is the latest kernel I have tested with the above tool to update > the EC ROM. I used the old 2.6.27.7 and the linux-ec-yeeloong module I still had lying around, and the update succeeded. However, I don't see that it had any positive effects. In fact, 2.6.32.2 now reports the fan to be stuck at 122RPM, temp1 as 0C and temp2 as 31C. temp1 is noticeably wrong given how warm the machine is. It is likely over 60C. I'll let it cool down for a while and try to bring it up again: maybe something went wrong during boot up, as it was a bit too warm. I'll let you know if that at least recovers the functionality that was present before the EC update. Any other suggestions, other than replacing the fan with the one that should be on the way? Thanks, -- Alexandre Oliva, freedom fighter http://FSFLA.org/~lxoliva/ You must be the change you wish to see in the world. -- Gandhi Be Free! -- http://FSFLA.org/ FSF Latin America board member Free Software Evangelist Red Hat Brazil Compiler Engineer _______________________________________________ gNewSense-dev mailing list [email protected] http://lists.nongnu.org/mailman/listinfo/gnewsense-dev
