Why not use ekiga.net? There's a conference system included that's underutilized by the community, it even supports securing a conference room with a pin.
On Mon, May 19, 2008 at 10:30 PM, Bill McGonigle <[EMAIL PROTECTED]> wrote: > While not to diminish the value of this as a goal, I've recently > upgraded my PBX to the latest Elastix (kickin' better than Trixbox, > BTW) and there's a 'Conferences' thing I can turn on, should > GNHLUG'ers want to use it until the 'real' project is done. I should > be able to handle about a dozen connections before worrying about > capacity. I'm pretty sure it can record the call. I'd want to find > the best rate DID I can use for this before setting it loose. > > There's also a way to add the Elastix package set to an existing > CentOS install. Provided the CentOS is fairly recent. ;) ;) ;) > That might be a low-resistance way to get the real thing > bootstrapped, though with a shared 1Mb line among all freeloaders at > MV I'm not sure how well it'd perform. > > -Bill > > On May 19, 2008, at 22:13, Bruce Dawson wrote: > >> As I've described in the TeleMeeting topic >> (http://wiki.gnhlug.org/twiki2/bin/view/Organizational/TeleMeetings), >> I've run out of time to work on this project and am looking for >> volunteers to take it over for at least the short term, and >> probably the >> long term. I apologize for any inconvenience to people and the >> group as >> a whole. >> >> It appears I spent too much time trying to debug phantom software >> glitches caused by hardware not designed for this application. (And >> various farm and work "glitches" added their impact too.) >> >> I can answer questions via email, if there are any. (I do have an >> older >> version of Asterisk that I can re-build for liberty if desired, but it >> would probably be best if whoever took over this project just built >> the >> latest version.) I think if you just go with ztdummy that you will >> avoid >> the PCI headaches I ran into. > > > ----- > Bill McGonigle, Owner Work: 603.448.4440 > BFC Computing, LLC Home: 603.448.1668 > [EMAIL PROTECTED] Cell: 603.252.2606 > http://www.bfccomputing.com/ Page: 603.442.1833 > Blog: http://blog.bfccomputing.com/ > VCard: http://bfccomputing.com/vcard/bill.vcf > > _______________________________________________ > gnhlug-org mailing list > gnhlug-org@mail.gnhlug.org > http://mail.gnhlug.org/mailman/listinfo/gnhlug-org/ > _______________________________________________ gnhlug-org mailing list gnhlug-org@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-org/
