Still don't have the parellel printing working, but I have the 5M
working under the alternate plan - I hooked it via JetDirect card to
my home network, and network print. Working great, although (I don't
know why, any help?) I had to set the mask on my eth0 connection
(10.0.0.0 network, using 10.10.x.x) to 255.255.0.0. Setting to
255.0.0.0 and I couldn't communicate at all on eth0.
/var/log/messages showed no route to remote host. Setting mask to
255.255.0.0, and voila - everything works. EtherExpress card on S1668
Tyan Dual Pentium Pro board.
jeff smith
**********************************************************
To unsubscribe from this list, send mail to
[EMAIL PROTECTED] with the following text in the
*body* (*not* the subject line) of the letter:
unsubscribe gnhlug
**********************************************************
