On Thu, 28 Mar 2002, Paul Iadonisi wrote: > Intel 440GX Chipset? If so, it's a known problem with buggy bioses on > these boards. The only known fixes/workarounds are to enable IO_APIC in the > kernel, which should be enabled in the install kernel, or use the smp kernel. > But, unfortunately, it's been reported that it doesn't always work. > If it's not a 440GX chipset, I'm not sure what the problem is, but it > could be related. If you can install the OS on the disk by putting it in > a different system and then make sure the kernel-smp package is installed > and configured to boot, you might have better luck. > Hope that helps.
If it's not the 440GX as above then check your termination and SCSI ID selection. Try a different cable etc....SCSI can be rather picky at times! --rdp -- Rich Payne http://talisman.mv.com ***************************************************************** To unsubscribe from this list, send mail to [EMAIL PROTECTED] with the text 'unsubscribe gnhlug' in the message body. *****************************************************************
