Ok, I ran those commands, and it failed on make with the same error: make[2]: *** No rule to make target `gnome-pilot-conduit-private.h', needed by `all'. Stop.
the .c and .h files are being generated, but the -private.h file isn't. Googling this specific error makes it look like a corrupt makefile or something. Very peculiar. I have attached the log of autogen and make, in the off chance that one of the non-fatal warnings it spits out is important. Evan On Jan 8, 2008 5:16 AM, Matt Davey <[EMAIL PROTECTED]> wrote: > Hi Evan, > > On Mon, 2008-01-07 at 20:30 -0500, Evan wrote: > > I poked around a little more, and found that I needed to use gob2 to > > turn all of the .gob files into .c and .h files, which the compiler > > had previously been missing. It gets somewhat further, but now it > > appears I am missing /gpilotd/gnome- pilot-conduit-private.h which has > > no corresponding .gob file to process. Where is this mysterious file? > > gnome-pilot-conduit-private.h is generated from gnome-pilot-conduit.gob. > This should happen automatically if gnome-pilot-conduit.c or > gnome-pilot-conduit.h is missing. If you ran gob2 by hand you probably > forgot to use the "--always-private-header" option. > > You shouldn't be hitting any of these problems. If autogen is running > for you, do a 'make distclean && ./autogen.sh && make && make install'. > > Matt > > Matt Davey Confucius say: To understand recursion, you must > [EMAIL PROTECTED] first understand recursion. > > _______________________________________________ > gnome-pilot-list mailing list > [email protected] > http://mail.gnome.org/mailman/listinfo/gnome-pilot-list >
[EMAIL PROTECTED]:~/gnome-pilot$ ./autogen.sh /usr/bin/gnome-autogen.sh checking for autoconf >= 2.53... testing autoconf2.50... not found. testing autoconf... found 2.61 checking for automake >= 1.6... testing automake-1.10... found 1.10 checking for libtool >= 1.5... testing libtoolize... found 1.5.24 checking for glib-gettext >= 2.2.0... testing glib-gettextize... found 2.14.1 checking for intltool >= 0.30... testing intltoolize... found 0.36.2 checking for pkg-config >= 0.14.0... testing pkg-config... found 0.22 Checking for required M4 macros... Checking for forbidden M4 macros... **Warning**: I am going to run `configure' with no arguments. If you wish to pass any to it, please specify them on the `./autogen.sh' command line. Processing ./configure.in Running libtoolize... Running glib-gettextize... Ignore non-fatal messages. Copying file mkinstalldirs Copying file po/Makefile.in.in Please add the files codeset.m4 gettext.m4 glibc21.m4 iconv.m4 isc-posix.m4 lcmessage.m4 progtest.m4 from the /aclocal directory to your autoconf macro directory or directly to your aclocal.m4 file. You will also need config.guess and config.sub, which you can get from ftp://ftp.gnu.org/pub/gnu/config/. Running intltoolize... Running aclocal-1.10... acinclude.m4:124: the serial number must appear before any macro definition acinclude.m4:128: warning: underquoted definition of AM_PATH_PROG_WITH_TEST acinclude.m4:128: run info '(automake)Extending aclocal' acinclude.m4:128: or see http://sources.redhat.com/automake/automake.html#Extending-aclocal acinclude.m4:176: the serial number must appear before any macro definition acinclude.m4:201: the serial number must appear before any macro definition Running autoconf... Running autoheader... Running automake-1.10... capplet/Makefile.am:46: `%'-style pattern rules are a GNU make extension Running ./configure --enable-maintainer-mode ... checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking for style of include used by make... GNU checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking dependency style of gcc... gcc3 checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for /usr/bin/ld option to reload object files... -r checking for BSD-compatible nm... /usr/bin/nm -B checking whether ln -s works... yes checking how to recognize dependent libraries... pass_all checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... gcc3 checking how to run the C++ preprocessor... g++ -E checking for g77... g77 checking whether we are using the GNU Fortran 77 compiler... yes checking whether g77 accepts -g... yes checking the maximum length of command line arguments... 98304 checking command to parse /usr/bin/nm -B output from gcc object... ok checking for objdir... .libs checking for ar... ar checking for ranlib... ranlib checking for strip... strip checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC checking if gcc PIC flag -fPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by g++... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC checking if g++ PIC flag -fPIC works... yes checking if g++ static flag -static works... yes checking if g++ supports -c -o file.o... yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for g77 option to produce PIC... -fPIC checking if g77 PIC flag -fPIC works... yes checking if g77 static flag -static works... yes checking if g77 supports -c -o file.o... yes checking whether the g77 linker (/usr/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether to enable maintainer-specific portions of Makefiles... yes checking for intltool >= 0.35.0... 0.36.2 found checking for perl... /usr/bin/perl checking for XML::Parser... ok checking for library containing strerror... none required checking for gcc... (cached) gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking dependency style of gcc... (cached) gcc3 checking whether we are using the GNU C++ compiler... (cached) yes checking whether g++ accepts -g... (cached) yes checking dependency style of g++... (cached) gcc3 checking for bison... no checking for byacc... no checking for ANSI C header files... (cached) yes checking what warning flags to pass to the C compiler... -Wall -Wmissing-prototypes checking what language compliance flags to pass to the C compiler... checking pi-version.h usability... yes checking pi-version.h presence... yes checking for pi-version.h... yes checking for pi_accept in -lpisock... yes checking for pilot-link version >= 0.11.4... yes (found 0.12.2) checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for HAL... yes checking for GNOME_PILOT... yes checking for PILOT_APPLET... yes checking for gob2... /usr/bin/gob2 checking for gob2... /usr/bin/gob2 checking for gob-2 >= 2.0.3... ok checking for gconftool-2... /usr/bin/gconftool-2 Using config source xml:merged:/etc/gconf/gconf.xml.defaults for schema installation Using $(sysconfdir)/gconf/schemas as install directory for schema files checking locale.h usability... yes checking locale.h presence... yes checking for locale.h... yes checking for LC_MESSAGES... yes checking libintl.h usability... yes checking libintl.h presence... yes checking for libintl.h... yes checking for ngettext in libc... yes checking for dgettext in libc... yes checking for bind_textdomain_codeset... yes checking for msgfmt... /usr/bin/msgfmt checking for dcgettext... yes checking if msgfmt accepts -c... yes checking for gmsgfmt... /usr/bin/msgfmt checking for xgettext... /usr/bin/xgettext checking for sendmsg in -lsocket... no checking for crypt... no checking for crypt in -lufc... no checking for crypt in -lcrypt... yes configure: creating ./config.status config.status: creating Makefile config.status: creating gnome-pilot.spec config.status: creating gpilotd/Makefile config.status: creating applet/Makefile config.status: creating conduits/Makefile config.status: creating conduits/backup/Makefile config.status: creating conduits/file/Makefile config.status: creating conduits/test/Makefile config.status: creating capplet/Makefile config.status: creating utils/Makefile config.status: creating idl/Makefile config.status: creating libgpilotdCM/Makefile config.status: creating po/Makefile.in config.status: creating help/Makefile config.status: creating help/C/Makefile config.status: creating gnome-pilot-2.0.pc config.status: creating config.h config.status: executing depfiles commands config.status: executing intltool commands config.status: executing default-1 commands config.status: executing po/stamp-it commands Configuration : gnome-vfs : yes network sync : yes usb : yes HAL/DBUS : yes gob : yes pilot-link : 0.12.2 Now type `make' to compile gnome-pilot [EMAIL PROTECTED]:~/gnome-pilot$ make make all-recursive make[1]: Entering directory `/home/eapache/gnome-pilot' Making all in po make[2]: Entering directory `/home/eapache/gnome-pilot/po' file=`echo ar | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file ar.po file=`echo am | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file am.po file=`echo az | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file az.po file=`echo ca | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file ca.po file=`echo cs | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file cs.po file=`echo cy | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file cy.po file=`echo da | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file da.po file=`echo de | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file de.po file=`echo dz | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file dz.po file=`echo el | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file el.po file=`echo en_CA | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file en_CA.po file=`echo en_GB | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file en_GB.po file=`echo es | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file es.po file=`echo eu | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file eu.po file=`echo fi | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file fi.po file=`echo fr | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file fr.po file=`echo gl | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file gl.po file=`echo he | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file he.po file=`echo hr | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file hr.po file=`echo hu | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file hu.po file=`echo it | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file it.po file=`echo ja | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file ja.po file=`echo ko | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file ko.po file=`echo lt | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file lt.po file=`echo lv | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file lv.po file=`echo mk | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file mk.po file=`echo ml | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file ml.po file=`echo ms | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file ms.po file=`echo nb | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file nb.po file=`echo ne | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file ne.po file=`echo nl | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file nl.po file=`echo nn | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file nn.po file=`echo oc | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file oc.po file=`echo pa | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file pa.po file=`echo pl | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file pl.po file=`echo pt | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file pt.po file=`echo pt_BR | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file pt_BR.po file=`echo ru | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file ru.po file=`echo rw | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file rw.po file=`echo sk | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file sk.po file=`echo sr | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file sr.po file=`echo [EMAIL PROTECTED] | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file [EMAIL PROTECTED] file=`echo sv | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file sv.po file=`echo tr | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file tr.po file=`echo uk | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file uk.po file=`echo vi | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file vi.po file=`echo xh | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file xh.po file=`echo zh_CN | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file zh_CN.po file=`echo zh_HK | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file zh_HK.po file=`echo zh_TW | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file zh_TW.po make[2]: Leaving directory `/home/eapache/gnome-pilot/po' Making all in idl make[2]: Entering directory `/home/eapache/gnome-pilot/idl' make[2]: Nothing to be done for `all'. make[2]: Leaving directory `/home/eapache/gnome-pilot/idl' Making all in libgpilotdCM make[2]: Entering directory `/home/eapache/gnome-pilot/libgpilotdCM' make all-am make[3]: Entering directory `/home/eapache/gnome-pilot/libgpilotdCM' /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../gpilotd -I../libgpilotdCM -DG_LOG_DOMAIN=\"libgpilotdcm\" -DORBIT2=1 -pthread -I/usr/include/libxml2 -I/usr/include/libgnome-2.0 -I/usr/include/orbit-2.0 -I/usr/include/gconf/2 -I/usr/include/gnome-vfs-2.0 -I/usr/lib/gnome-vfs-2.0/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libbonobo-2.0 -I/usr/include/bonobo-activation-2.0 -I/usr/include/libgnomeui-2.0 -I/usr/include/libart-2.0 -I/usr/include/gnome-keyring-1 -I/usr/include/libbonoboui-2.0 -I/usr/include/libgnomecanvas-2.0 -I/usr/include/gtk-2.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/gail-1.0 -I/usr/include/atk-1.0 -I/usr/lib/gtk-2.0/include -I/usr/include/cairo -I/usr/include/libpng12 -I/usr/include/libglade-2.0 -DDBUS_API_SUBJECT_TO_CHANGE -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/hal -DCONDUITDIR=\"/usr/local/share\" -g -O2 -Wall -Wmissing-prototypes -MT gnome-pilot-conduit-management.lo -MD -MP -MF .deps/gnome-pilot-conduit-management.Tpo -c -o gnome-pilot-conduit-management.lo gnome-pilot-conduit-management.c mkdir .libs gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../gpilotd -I../libgpilotdCM -DG_LOG_DOMAIN=\"libgpilotdcm\" -DORBIT2=1 -pthread -I/usr/include/libxml2 -I/usr/include/libgnome-2.0 -I/usr/include/orbit-2.0 -I/usr/include/gconf/2 -I/usr/include/gnome-vfs-2.0 -I/usr/lib/gnome-vfs-2.0/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libbonobo-2.0 -I/usr/include/bonobo-activation-2.0 -I/usr/include/libgnomeui-2.0 -I/usr/include/libart-2.0 -I/usr/include/gnome-keyring-1 -I/usr/include/libbonoboui-2.0 -I/usr/include/libgnomecanvas-2.0 -I/usr/include/gtk-2.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/gail-1.0 -I/usr/include/atk-1.0 -I/usr/lib/gtk-2.0/include -I/usr/include/cairo -I/usr/include/libpng12 -I/usr/include/libglade-2.0 -DDBUS_API_SUBJECT_TO_CHANGE -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/hal -DCONDUITDIR=\"/usr/local/share\" -g -O2 -Wall -Wmissing-prototypes -MT gnome-pilot-conduit-management.lo -MD -MP -MF .deps/gnome-pilot-conduit-management.Tpo -c gnome-pilot-conduit-management.c -fPIC -DPIC -o .libs/gnome-pilot-conduit-management.o gnome-pilot-conduit-management.gob: In function 'gnome_pilot_conduit_management_check_xml_version': gnome-pilot-conduit-management.gob:341: warning: pointer targets in passing argument 2 of 'xmlGetProp' differ in signedness gnome-pilot-conduit-management.gob:343: warning: pointer targets in passing argument 1 of 'g_strcasecmp' differ in signedness gnome-pilot-conduit-management.gob: In function 'gnome_pilot_conduit_management_read_conduit_topdata': gnome-pilot-conduit-management.gob:363: warning: pointer targets in passing argument 1 of 'g_strcasecmp' differ in signedness gnome-pilot-conduit-management.gob:370: warning: pointer targets in passing argument 2 of 'xmlGetProp' differ in signedness gnome-pilot-conduit-management.gob:371: warning: pointer targets in passing argument 2 of 'xmlGetProp' differ in signedness gnome-pilot-conduit-management.gob:372: warning: pointer targets in passing argument 2 of 'xmlGetProp' differ in signedness gnome-pilot-conduit-management.gob:380: warning: pointer targets in passing argument 1 of '__builtin_strchr' differ in signedness gnome-pilot-conduit-management.gob:395: warning: pointer targets in passing argument 1 of 'g_strcasecmp' differ in signedness gnome-pilot-conduit-management.gob:404: warning: pointer targets in passing argument 1 of 'g_strdup' differ in signedness gnome-pilot-conduit-management.gob:405: warning: pointer targets in passing argument 1 of 'g_strdup' differ in signedness gnome-pilot-conduit-management.gob: In function 'gnome_pilot_conduit_management_read_conduit_name': gnome-pilot-conduit-management.gob:434: warning: pointer targets in passing argument 1 of 'g_strcasecmp' differ in signedness gnome-pilot-conduit-management.gob:438: warning: pointer targets in passing argument 2 of 'xmlGetProp' differ in signedness gnome-pilot-conduit-management.gob:439: warning: pointer targets in passing argument 2 of 'xmlGetProp' differ in signedness gnome-pilot-conduit-management.gob:444: warning: pointer targets in passing argument 1 of 'g_strcasecmp' differ in signedness gnome-pilot-conduit-management.gob:446: warning: pointer targets in passing argument 1 of 'g_strdup' differ in signedness gnome-pilot-conduit-management.gob: In function 'gnome_pilot_conduit_management_read_conduit_attributes': gnome-pilot-conduit-management.gob:473: warning: pointer targets in passing argument 1 of 'g_strcasecmp' differ in signedness gnome-pilot-conduit-management.gob:477: warning: pointer targets in passing argument 2 of 'xmlGetProp' differ in signedness gnome-pilot-conduit-management.gob:478: warning: pointer targets in passing argument 2 of 'xmlGetProp' differ in signedness gnome-pilot-conduit-management.gob:479: warning: pointer targets in passing argument 2 of 'xmlGetProp' differ in signedness gnome-pilot-conduit-management.gob:480: warning: pointer targets in passing argument 2 of 'xmlGetProp' differ in signedness gnome-pilot-conduit-management.gob:504: warning: pointer targets in passing argument 1 of 'g_strdup' differ in signedness gnome-pilot-conduit-management.gob:507: warning: pointer targets in passing argument 1 of 'g_strcasecmp' differ in signedness gnome-pilot-conduit-management.gob:510: warning: pointer targets in passing argument 1 of 'g_strdup' differ in signedness gnome-pilot-conduit-management.gob:519: warning: pointer targets in passing argument 1 of 'g_strcasecmp' differ in signedness gnome-pilot-conduit-management.gob:521: warning: pointer targets in passing argument 1 of 'gnome_pilot_conduit_management_is_other_valid_tag' differ in signedness gnome-pilot-conduit-management.gob: In function 'gnome_pilot_conduit_management_read_conduit_xml': gnome-pilot-conduit-management.gob:547: warning: pointer targets in passing argument 1 of 'g_strcasecmp' differ in signedness gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../gpilotd -I../libgpilotdCM -DG_LOG_DOMAIN=\"libgpilotdcm\" -DORBIT2=1 -pthread -I/usr/include/libxml2 -I/usr/include/libgnome-2.0 -I/usr/include/orbit-2.0 -I/usr/include/gconf/2 -I/usr/include/gnome-vfs-2.0 -I/usr/lib/gnome-vfs-2.0/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libbonobo-2.0 -I/usr/include/bonobo-activation-2.0 -I/usr/include/libgnomeui-2.0 -I/usr/include/libart-2.0 -I/usr/include/gnome-keyring-1 -I/usr/include/libbonoboui-2.0 -I/usr/include/libgnomecanvas-2.0 -I/usr/include/gtk-2.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/gail-1.0 -I/usr/include/atk-1.0 -I/usr/lib/gtk-2.0/include -I/usr/include/cairo -I/usr/include/libpng12 -I/usr/include/libglade-2.0 -DDBUS_API_SUBJECT_TO_CHANGE -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/hal -DCONDUITDIR=\"/usr/local/share\" -g -O2 -Wall -Wmissing-prototypes -MT gnome-pilot-conduit-management.lo -MD -MP -MF .deps/gnome-pilot-conduit-management.Tpo -c gnome-pilot-conduit-management.c -o gnome-pilot-conduit-management.o >/dev/null 2>&1 mv -f .deps/gnome-pilot-conduit-management.Tpo .deps/gnome-pilot-conduit-management.Plo /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../gpilotd -I../libgpilotdCM -DG_LOG_DOMAIN=\"libgpilotdcm\" -DORBIT2=1 -pthread -I/usr/include/libxml2 -I/usr/include/libgnome-2.0 -I/usr/include/orbit-2.0 -I/usr/include/gconf/2 -I/usr/include/gnome-vfs-2.0 -I/usr/lib/gnome-vfs-2.0/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libbonobo-2.0 -I/usr/include/bonobo-activation-2.0 -I/usr/include/libgnomeui-2.0 -I/usr/include/libart-2.0 -I/usr/include/gnome-keyring-1 -I/usr/include/libbonoboui-2.0 -I/usr/include/libgnomecanvas-2.0 -I/usr/include/gtk-2.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/gail-1.0 -I/usr/include/atk-1.0 -I/usr/lib/gtk-2.0/include -I/usr/include/cairo -I/usr/include/libpng12 -I/usr/include/libglade-2.0 -DDBUS_API_SUBJECT_TO_CHANGE -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/hal -DCONDUITDIR=\"/usr/local/share\" -g -O2 -Wall -Wmissing-prototypes -MT gnome-pilot-conduit-config.lo -MD -MP -MF .deps/gnome-pilot-conduit-config.Tpo -c -o gnome-pilot-conduit-config.lo gnome-pilot-conduit-config.c gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../gpilotd -I../libgpilotdCM -DG_LOG_DOMAIN=\"libgpilotdcm\" -DORBIT2=1 -pthread -I/usr/include/libxml2 -I/usr/include/libgnome-2.0 -I/usr/include/orbit-2.0 -I/usr/include/gconf/2 -I/usr/include/gnome-vfs-2.0 -I/usr/lib/gnome-vfs-2.0/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libbonobo-2.0 -I/usr/include/bonobo-activation-2.0 -I/usr/include/libgnomeui-2.0 -I/usr/include/libart-2.0 -I/usr/include/gnome-keyring-1 -I/usr/include/libbonoboui-2.0 -I/usr/include/libgnomecanvas-2.0 -I/usr/include/gtk-2.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/gail-1.0 -I/usr/include/atk-1.0 -I/usr/lib/gtk-2.0/include -I/usr/include/cairo -I/usr/include/libpng12 -I/usr/include/libglade-2.0 -DDBUS_API_SUBJECT_TO_CHANGE -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/hal -DCONDUITDIR=\"/usr/local/share\" -g -O2 -Wall -Wmissing-prototypes -MT gnome-pilot-conduit-config.lo -MD -MP -MF .deps/gnome-pilot-conduit-config.Tpo -c gnome-pilot-conduit-config.c -fPIC -DPIC -o .libs/gnome-pilot-conduit-config.o gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../gpilotd -I../libgpilotdCM -DG_LOG_DOMAIN=\"libgpilotdcm\" -DORBIT2=1 -pthread -I/usr/include/libxml2 -I/usr/include/libgnome-2.0 -I/usr/include/orbit-2.0 -I/usr/include/gconf/2 -I/usr/include/gnome-vfs-2.0 -I/usr/lib/gnome-vfs-2.0/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libbonobo-2.0 -I/usr/include/bonobo-activation-2.0 -I/usr/include/libgnomeui-2.0 -I/usr/include/libart-2.0 -I/usr/include/gnome-keyring-1 -I/usr/include/libbonoboui-2.0 -I/usr/include/libgnomecanvas-2.0 -I/usr/include/gtk-2.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/gail-1.0 -I/usr/include/atk-1.0 -I/usr/lib/gtk-2.0/include -I/usr/include/cairo -I/usr/include/libpng12 -I/usr/include/libglade-2.0 -DDBUS_API_SUBJECT_TO_CHANGE -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/hal -DCONDUITDIR=\"/usr/local/share\" -g -O2 -Wall -Wmissing-prototypes -MT gnome-pilot-conduit-config.lo -MD -MP -MF .deps/gnome-pilot-conduit-config.Tpo -c gnome-pilot-conduit-config.c -o gnome-pilot-conduit-config.o >/dev/null 2>&1 mv -f .deps/gnome-pilot-conduit-config.Tpo .deps/gnome-pilot-conduit-config.Plo /bin/bash ../libtool --tag=CC --mode=link gcc -g -O2 -Wall -Wmissing-prototypes -version-info 2:2:0 -o libgpilotdcm.la -rpath /usr/local/lib/ gnome-pilot-conduit-management.lo gnome-pilot-conduit-config.lo -pthread -lgnomeui-2 -lSM -lICE -lbonoboui-2 -lgnomecanvas-2 -lgnome-2 -lpopt -lart_lgpl_2 -lglade-2.0 -lgtk-x11-2.0 -lxml2 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangocairo-1.0 -lfontconfig -lXext -lXrender -lXinerama -lXi -lXrandr -lXcursor -lXcomposite -lXdamage -lpango-1.0 -lcairo -lX11 -lXfixes -lbonobo-2 -lbonobo-activation -lgnomevfs-2 -lgmodule-2.0 -ldl -lgconf-2 -lORBit-2 -lgthread-2.0 -lrt -lgobject-2.0 -lglib-2.0 -lpisock -lpisync -ldbus-glib-1 -lgobject-2.0 -lglib-2.0 -lhal -ldbus-1 -lcrypt gcc -shared .libs/gnome-pilot-conduit-management.o .libs/gnome-pilot-conduit-config.o /usr/lib/libgnomeui-2.so -lSM -lICE /usr/lib/libbonoboui-2.so /usr/lib/libgnomecanvas-2.so /usr/lib/libgnome-2.so /usr/lib/libpopt.so /usr/lib/libart_lgpl_2.so /usr/lib/libglade-2.0.so /usr/lib/libgtk-x11-2.0.so /usr/lib/libxml2.so /usr/lib/libgdk-x11-2.0.so /usr/lib/libatk-1.0.so /usr/lib/libgdk_pixbuf-2.0.so -lm /usr/lib/libpangocairo-1.0.so -lfontconfig -lXext -lXrender -lXinerama -lXi -lXrandr -lXcursor -lXcomposite -lXdamage /usr/lib/libpango-1.0.so /usr/lib/libcairo.so -lX11 -lXfixes /usr/lib/libbonobo-2.so /usr/lib/libbonobo-activation.so /usr/lib/libgnomevfs-2.so /usr/lib/libgmodule-2.0.so -ldl /usr/lib/libgconf-2.so /usr/lib/libORBit-2.so /usr/lib/libgthread-2.0.so -lrt /usr/lib/libpisock.so /usr/lib/libpisync.so -ldbus-glib-1 /usr/lib/libgobject-2.0.so /usr/lib/libglib-2.0.so -lhal -ldbus-1 -lcrypt -pthread -Wl,-soname -Wl,libgpilotdcm.so.2 -o .libs/libgpilotdcm.so.2.0.2 (cd .libs && rm -f libgpilotdcm.so.2 && ln -s libgpilotdcm.so.2.0.2 libgpilotdcm.so.2) (cd .libs && rm -f libgpilotdcm.so && ln -s libgpilotdcm.so.2.0.2 libgpilotdcm.so) ar cru .libs/libgpilotdcm.a gnome-pilot-conduit-management.o gnome-pilot-conduit-config.o ranlib .libs/libgpilotdcm.a creating libgpilotdcm.la (cd .libs && rm -f libgpilotdcm.la && ln -s ../libgpilotdcm.la libgpilotdcm.la) make[3]: Leaving directory `/home/eapache/gnome-pilot/libgpilotdCM' make[2]: Leaving directory `/home/eapache/gnome-pilot/libgpilotdCM' Making all in gpilotd make[2]: Entering directory `/home/eapache/gnome-pilot/gpilotd' /usr/bin/orbit-idl-2 ../idl/gnome-pilot.idl orbit-idl-2 2.14.9 compiling mode, hide preprocessor errors, passes: stubs skels common headers Processing file ../idl/gnome-pilot.idl make[2]: *** No rule to make target `gnome-pilot-conduit-private.h', needed by `all'. Stop. make[2]: Leaving directory `/home/eapache/gnome-pilot/gpilotd' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/eapache/gnome-pilot' make: *** [all] Error 2 [EMAIL PROTECTED]:~/gnome-pilot$
_______________________________________________ gnome-pilot-list mailing list [email protected] http://mail.gnome.org/mailman/listinfo/gnome-pilot-list
