I forgot! Thanks a lot! Le lundi 04 avril 2005 � 09:35 +0200, Damien Sandras a �crit : > Hi Georgi, > > > Is it able to do DC too? > Do you think you can fix the "does not report the pretty name of the > camera" problem? > Finally, I think it can be proposed to Craig for inclusion. It doesn't > require any extra dep, so it is perfect :) > > Le lundi 04 avril 2005 � 10:54 +0900, Georgi Georgiev a �crit : > > (I hope this mail makes it) > > > > This message is mostly targeted at people who are using the AVC plugin > > for their MiniDV camera. > > > > A new implementation of a DV1394 plugin (cleanly installable along with > > the current plugins) is available for download from > > http://www.gg3.net/~chutz/dvplugins/ > > > > The major differences between the new DV and the current AVC plugins > > are: > > > > - no more (silently) dropped frames (or at least *less* of them) > > - depends on a loaded dv1394 kernel module > > - does not depend on libavc1394 > > - does not depend on libraw1394 > > - does not report the pretty name of your camera > > - no crashes on my 2.6 kernel (AVC was freezing on me after a few > > seconds) > > > > Any reports/comments/suggestions from brave souls are much appreciated. > > > > == Short F.A.Q. == > > > > - ../../make/unix.mak: No such file or directory > > > > It should be possible to compile the module with a simple "make". If > > you get errors about a missing "make/unix.mak", then run this command > > on the "make/plugins.mak" file that came with pwlib: > > > > sed -e 's,\(include *\)\.\./\.\./,\1$(PWLIBDIR)/,' > > > > To Whom It May Concern: Could someone fix the source, so that > > plugins.mak includes files from the proper location, like the other > > .mak files do? > > > > - "ptlib-config: Command not found" or missing headers > > > > You need the pwlib development package for your system I guess. You > > also need the libdv devel packages, and that should be about it. > > > > - The dv1394 kernel module: > > > > This module provides character devices that allow you to directly read > > a raw DV stream. > > > > - No devices detected > > > > The new DV plugin for pwlib looks for a device at all possible (known > > to me) locations. In addition, it will also look for a file named > > ./symlinked.dv. The idea of this ./symlinked.dv is to allow you to > > create a symlink to your device file on your system if it is not > > detected. > > > > If your /dev lacks the required devices, you probably need to create > > the nodes yourself. Take a look at http://www.linux1394.org/dv1394.php > > > > Summarized: > > > > In the absence of devfs, you can make your own device by, for > > example, > > mknod -m 666 /dev/dv1394 c 171 32 for NTSC > > or > > mknod -m 666 /dev/dv1394 c 171 34 for PAL > > > > Also see below for udev and devfs support. > > > > - udev > > > > Version 2.6.12-rc1 of the linux kernel has the ieee1394 family of > > modules with enabled sysfs support. If you are running 2.6.12-rc1 or > > later with udev, you should get a device like /dev/dv1394-0 or > > similar. > > > > I also recommend adding the two lines below to your udev rules, in > > order to make your setup a bit prettier. I guess a future version of > > udev will include these lines. > > > > KERNEL="dv1394-*", NAME="dv1394/%n", GROUP="video" > > KERNEL="video1394-*" NAME="video1394/%n", GROUP="video" > > > > - devfs > > > > The dv1394 module creates devices at > > /dev/ieee1394/dv/host#/{NTSC,PAL}/{in,out} > > I don't have a devfs setup, so I decided to trust the data at > > http://www.linux1394.org/dv1394.php > > > > -- _ Damien Sandras (o- GnomeMeeting: http://www.gnomemeeting.org/ //\ FOSDEM 2005 : http://www.fosdem.org v_/_ H.323 phone : callto:ils.seconix.com/[EMAIL PROTECTED]
_______________________________________________ GnomeMeeting-list mailing list [email protected] http://mail.gnome.org/mailman/listinfo/gnomemeeting-list
