On 21/02/06, Damien Sandras <[EMAIL PROTECTED]> wrote: > Le mardi 21 février 2006 à 22:42 +0000, Paulo J. Matos a écrit : > > On 21/02/06, Damien Sandras <[EMAIL PROTECTED]> wrote: > > > Le mardi 21 février 2006 à 22:18 +0000, Paulo J. Matos a écrit : > > > > > It shouldn't freeze. > > > > > > > > > > > > > But it is, if I can send you some info about this, please tell me how. > > > > > > > > > > I will not be able to debug this before 2.00 sorry. > > > > > > Perhaps somebody else can step up? > > > > > > Anyway, look in the archives on how to get a backtrace, it is asked > > > every week :) > > > > > > Basically: > > > gdb ekiga > > > run > > > (make it freeze) > > > Ctrl-C > > > thread apply all bt > > > > > > > > However, if you look at the log, you seem to be using a very busy NAT > > > > > router, and STUN can not allocate ports required for the > > > > > communication. > > > > > That sometimes happens with extremely busy and restrictive routers. > > > > > > > > It is probably very busy since a lot of computers are at the moment > > > > downloading a lot of stuff... still, is there a way I can workaround > > > > the issue? > > > > > > Try changing the port ranges using gconf-editors and cross your fingers. > > > > > > > My computer is DMZ, and I use a iptables based firewall so if I can > > > > just open some ports for this to work, I will... > > > > > > > > > > If your computer is in the DMZ, you should not need STUN, only IP > > > translation. > > > > > Removing STUN and adding IP translation only gives me "Security Check" > > failed. > > On debug info: > > 2006/02/21 22:37:13.499 0:12.080 SIP Handler:b47064b8 SIP > > Sending PDU on udp$213.186.62.145:5060<if=udp$192.168.123.101:5062> > > ACK sip:[EMAIL PROTECTED] SIP/2.0 > > CSeq: 1 ACK > > Via: SIP/2.0/UDP > > 217.129.147.164:5062;branch=z9hG4bK62ff1f45-98a1-da11-877b-00e000faa13b;rport > > From: "Paulo Matos" > > <sip:[EMAIL PROTECTED]>;tag=b0771d45-98a1-da11-877b-00e000faa13b > > Call-ID: [EMAIL PROTECTED] > > To: <sip:[EMAIL PROTECTED]>;tag=90a5d545cb0d562dfea323892378f940.858b > > Allow: INVITE, ACK, OPTIONS, BYE, CANCEL, REGISTER, SUBSCRIBE, NOTIFY, > > REFER, MESSAGE > > Content-Length: 0 > > Max-Forwards: 70 > > > > > > 2006/02/21 22:37:13.499 0:12.080 SIP Handler:b47064b8 SIP > > Received Proxy Authentication Required response > > 2006/02/21 22:37:13.500 0:12.081 SIP Handler:b47064b8 SIP > > Couldn't find authentication information for realm ekiga.net, will > > use SIP Outbound Proxy authentication settings, if any > > > > I imagine this is the problem but I don't know why... > > Probably you are not registered. >
Registration fails due to timeout... In log: 006/02/21 22:44:35.713 0:06.842 Housekeeper SIP Sending PDU on udp$213.186.62.145:5060<if=udp$192.168.123.101:5061> REGISTER sip:ekiga.net SIP/2.0 CSeq: 1 REGISTER Via: SIP/2.0/UDP 217.129.147.164:5061;branch=z9hG4bK6889384b-99a1-da11-9580-00e000faa13b;rport User-Agent: Ekiga/1.99.1 From: <sip:[EMAIL PROTECTED]>;tag=d675384b-99a1-da11-9580-00e000faa13b Call-ID: [EMAIL PROTECTED] To: <sip:[EMAIL PROTECTED]> Contact: <sip:[EMAIL PROTECTED]:5061;transport=udp> Allow: INVITE, ACK, OPTIONS, BYE, CANCEL, REGISTER, SUBSCRIBE, NOTIFY, REFER, MESSAGE Expires: 3600 Content-Length: 0 Max-Forwards: 70 2006/02/21 22:44:36.120 0:07.248 Housekeeper SIP Set state Terminated_Timeout for transaction 1 REGISTER Do I need to port forward? On the first line: udp$213.186.62.145:5060<if=udp$192.168.123.101:5061 First is my external address, second if my machine (DMZ), should I open port 5061 on my firewall? Should I open any port? Paulo Matos > -- > _ Damien Sandras > (o- > //\ Ekiga Softphone: http://www.ekiga.org/ > v_/_ FOSDEM 2006 : http://www.fosdem.org/ > SIP Phone : sip:[EMAIL PROTECTED] > sip:[EMAIL PROTECTED] > > -- Paulo Jorge Matos - pocm at sat inesc-id pt Web: http://sat.inesc-id.pt/~pocm Computer and Software Engineering INESC-ID - SAT Group _______________________________________________ GnomeMeeting-list mailing list [email protected] http://mail.gnome.org/mailman/listinfo/gnomemeeting-list
