Hi, Le lundi 29 mai 2006 à 15:35 +0100, Geoff a écrit : > Hi > > Removing all the old /etc/pwlib entries and reinstalling managed to > get ekiga running again. I now have two separate problems, one > relating to sound and the other to video. Finally I have a third > issue that I would like to see if others experience. > > I have reviewed the FAQ and searched the mail list but there is > nothing I can find to help. > > > SOUND > I can run the [EMAIL PROTECTED] test fine. (I can also run 900, 901, 902 > and [EMAIL PROTECTED] fine as well) > I can call a land line or mobile (via a voiptalk account) and can hear > sound both ways fine. > However, whenever my buisness partner and I try to talk ekiga to > ekiga, I cannot hear him. He can hear me fine. Are there any ports I > need to open on my router? I assume NAT would overcome this need? >
If [EMAIL PROTECTED] is working correctly, the problem is on his side. > > VIDEO > I cannot get my video to run under ekiga. > > Running lsusb gives the following; > > samson:~ # lsusb > Bus 005 Device 007: ID 046d:c50a Logitech, Inc. > Bus 005 Device 006: ID 22b8:4902 Motorola PCS E398 GSM Phone > Bus 005 Device 005: ID 0ea0:2118 Ours Technology, Inc. > Bus 005 Device 004: ID 055d:9000 Samsung Electro-Mechanics Co. AnyCam > [pwc] > Bus 005 Device 002: ID 0409:0059 NEC Corp. HighSpeed Hub > Bus 005 Device 001: ID 0000:0000 > Bus 004 Device 001: ID 0000:0000 > Bus 003 Device 001: ID 0000:0000 > Bus 002 Device 002: ID 0a5c:200a Broadcom Corp. > Bus 002 Device 001: ID 0000:0000 > Bus 001 Device 001: ID 0000:0000 > samson:~ # > > So the camera is recognised. Also probing the hardware shows that it > is recognised and that the drivers are correct (I have installed the > PWC module config drivers). However, > > > 1 When I select V4L it recognises my Samsung MPC-C10 but no matter > which format I try it does not show a picture. It just shows a grey > screen. Look in the archives of this mailing list, there are several mails related to that and giving tricks to work around that problem. > > 2 When I select V4L2 I get this message > > *********** > Error while opening video device /dev/video0 > > A moving logo will be transmitted during calls. Notice that you can > always transmit a given image or the moving logo by choosing "Picture" > as video plugin and "MovingLogo" or "StaticPicture" as device. > > There was an error while opening the device. Please check your > permissions and make sure that the appropriate driver is loaded. > ********** > > Can anyone tell me what the problem might be? > > > MULTIPLE INSTANCES > I occasionally get a problem that ekiga will not hang up after a call. > When this happens, system monitor shows two instances of ekiga running > and when I stop one, they both shut and I have to restart ekiga. If I > run system monitor alongside ekiga, I can see that ekiga opens a > second and sometimes a third instance to make the call then shuts them > down to a single instance. If I rush my next call, I "trap" the > instances so they cannot shut (no idea why). > > Do others face this? Can the code not prevent a new call being made > until the last is finished (hold it in a buffer?). Or is this a setup > problem that I have not managed properly? You can not do a call until the other one is properly hangup. > > > Geoff > > > > ______________________________________________________________________ > > > > Geoff Jankowski > Resource International > > +44 777 0 58 48 38 UK Mobile Voice > +44 777 0 58 92 48 UK Mobile Fax > +44 20 7661 9999 UK Office Voice > +44 870 458 0201 UK Office Fax > > +966 50 325 7097 KSA Mobile Voice > +966 1 462 2926 KSA Office Voice > +966 1 465 3560 KSA Office Fax > > ______________________________________________________________________ > > > > This message is confidential. It may also be privileged or protected > by other legal rules. It does not constitute an offer or acceptance of > an offer, nor shall it form any part of a legally binding contract > unless explicitly stated in its content. If you have received this > communication in error, please let us know by reply then destroy it. > You should not use, print, copy the message or disclose its contents > to anyone. > > Email is subject to possible data corruption, is not secure and its > content does not necessarily represent the opinion of this company. > No representation or warranty is made as to the accuracy or the > completeness of the information and no liability can be accepted for > any loss arising from its use. This email and any attachments are not > guaranteed to be free from computer viruses and it is recommended that > you check for suchg viruses before downloading it to your computer > equipment. This company has no control over other websites to which > there may be hypertext links and no liability can be accepted in > relation to those sites. > > ______________________________________________________________________ > _______________________________________________ > GnomeMeeting-list mailing list > [email protected] > http://mail.gnome.org/mailman/listinfo/gnomemeeting-list -- _ Damien Sandras (o- //\ Ekiga Softphone: http://www.ekiga.org/ v_/_ FOSDEM 2006 : http://www.fosdem.org/ SIP Phone : sip:[EMAIL PROTECTED] sip:[EMAIL PROTECTED] _______________________________________________ GnomeMeeting-list mailing list [email protected] http://mail.gnome.org/mailman/listinfo/gnomemeeting-list
