I've had much the same problem. I would appear to have some problems with IRQs though.
Here is a transcript of the output Mach gave me (if it is of any use to anyone): GNU Mach 1.3 AT386 boot: physical memory from 0x0 to 0x1fff0000 pcibios_init : BIOS32 Service Directory structure at 0xp pcibios_init : BIOS32 Service Directory entry at 0xfb470 pcibios_init : PCI BIOS revision 2.10 entry at 0xfb4a0 Probing PCI hardware. hd0: ST3200822A, 131071 MB w/8192kB Cache, CHS=16709/255/63 hd1: Maxtor 6Y080P0 78167 MB w/7936kB Cache, CHS=9964/255/63 hd2: SONY DVD RW DRU-500A, ATAPI CDROM drive ide0 at 0x1f0-0x1f7, 0x3f6 on irq 14 ide1 at 0x170-0x177, 0x376 on irq 15 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 panic: free_irq: bad irq number Kernel Breakpoint trap eip 0x116404 Stopped at 0x116403: int $3 I then received a prompt and did: db> trace ox116403(274d8a) >>>>> (unknown) (1852112906) at 0x61700064 <<<<< 0x61700064(Kernel General protection trap, eip 0xf000ff53 Caught General protection (13), code = 0, pc = f000ff53 I copied the above by hand (is there a better way?) hopefully it doesn't contain any errors though. I don't know much about Mach and sadly don't have time to work much on this problem sadly. Hopefully this information will be of some small use to someone. Regards, Daniel. _______________________________________________ gnu-system-discuss mailing list [email protected] http://lists.gnu.org/mailman/listinfo/gnu-system-discuss
